Does anyone have a StrutPro that I could buy or rent, borrow or steal? I have a cutlass bearing to replace and I know the boat is currently blocked too low to remove the shaft. I may just make a puller/pusher, but I have heard that the Strut Pro is a pretty slick tool. Any help would be appeciated.
Welcome to the Hatteras Owners Forum & Gallery. Sign Up or Login
+ Reply to Thread
Results 1 to 5 of 5
Thread: Wanted: Strut Pro
-
Wanted: Strut Pro
Last edited by SKYCHENEY; 10-05-2006 at 10:23 PM.
Sky Cheney
1985 53EDMY, Hull #CN759, "Rebecca"
ELYC on White Lake--Montague, MI
-
10-05-2006 10:32 PM #2
- Join Date
- Apr 2005
- Posts
- 83
Re: Wanted: Strut Pro
Sky, If you are not blocked on concrete or asphalt why not just dig a small trench and pull the stub shaft? Just a thought.
-
Re: Wanted: Strut Pro
Nice thought, but it's a concrete floor. I'm in a heated building in the back corner, so if I have to drop the shaft, it won't be until spring when they can get the Travellift back to me.
Originally Posted by hatteras45
Sky, If you are not blocked on concrete or asphalt why not just dig a small trench and pull the stub shaft? Just a thought.Sky Cheney
1985 53EDMY, Hull #CN759, "Rebecca"
ELYC on White Lake--Montague, MI
-
10-06-2006 08:54 AM #4
- Join Date
- Apr 2005
- Posts
- 287
Re: Wanted: Strut Pro
What size Shafts?
JW
-
Re: Wanted: Strut Pro
Shafts are 2", but I could always buy the proper collets and shims if I found a unit to use.
Sky Cheney
1985 53EDMY, Hull #CN759, "Rebecca"
ELYC on White Lake--Montague, MI
Reply With Quote
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
