Does anyone have a StrutPro that I could buy or rent, borrow or steal? I have a cutlass bearing to replace and I know the boat is currently blocked too low to remove the shaft. I may just make a puller/pusher, but I have heard that the Strut Pro is a pretty slick tool. Any help would be appeciated.
Welcome to the Hatteras Owners Forum & Gallery. Sign Up or Login
+ Reply to Thread
Results 1 to 5 of 5
Thread: Wanted: Strut Pro
-
Wanted: Strut Pro
Last edited by SKYCHENEY; 10-05-2006 at 10:23 PM.
Sky Cheney
1985 53EDMY, Hull #CN759, "Rebecca"
ELYC on White Lake--Montague, MI
-
10-05-2006 10:32 PM #2Senior Member
- Join Date
- Apr 2005
- Posts
- 83
Re: Wanted: Strut Pro
Sky, If you are not blocked on concrete or asphalt why not just dig a small trench and pull the stub shaft? Just a thought.
-
Re: Wanted: Strut Pro
Originally Posted by hatteras45Sky Cheney
1985 53EDMY, Hull #CN759, "Rebecca"
ELYC on White Lake--Montague, MI
-
10-06-2006 08:54 AM #4Senior Member
- Join Date
- Apr 2005
- Posts
- 287
Re: Wanted: Strut Pro
What size Shafts?
JW
-
Re: Wanted: Strut Pro
Shafts are 2", but I could always buy the proper collets and shims if I found a unit to use.
Sky Cheney
1985 53EDMY, Hull #CN759, "Rebecca"
ELYC on White Lake--Montague, MI