Sams has the original seacocks that we’re installed when the boats were new. I bought 2 - 2 1/2” valves and thru hulls. According to the guys at Sams these are better quality than the Groco valves for about the same price. The seacock was about $800.00. Not sure why I need this quality considering my original ones lasted 50 years and I won’t be around for another 50 years but what the heck quality is always a good way to go.
Welcome to the Hatteras Owners Forum & Gallery. Sign Up or Login
+ Reply to Thread
Results 1 to 4 of 4
Thread: Thru hull seacock
-
Thru hull seacock
Mahalo V
1974 53 Motoryacht
Hull Number 406
San Diego, Ca. Ready 32 Nordic Tug, Brunswick Ga.
-
Re: Thru hull seacock
I like your style. Only the best.
SEVEN
1979 53' MY Hull #563
Antioch, California
-
03-08-2024 01:20 PM #3
Re: Thru hull seacock
I get the part about paying for quality. However, please be aware of price shopping. I needed a new raw water strainer, and Sams was out of the question for the one I wanted - Same as the 3 already in the generator room. I found it on Amazon at the time for about $150, its gone up to $208. But again, this was same strainer that was on my existing AC intakes and generator raw water intake.
Amazon.com: GROSS MECH. LABORATORIES Groco 3/4 in. Raw Water Strainer ARG-750-S : Tools & Home Improvement"A smooth sea never made a skillful sailor"
Rob Waldrop
M/V Pau Hana
Ft Myers FL
-
Re: Thru hull seacock
Sky Cheney
1985 53EDMY, Hull #CN759, "Rebecca"
ELYC on White Lake--Montague, MI