“Drive Temp” keeps going off?
Can anyone direct me to the sensor?
I don’t have a “Drive Temp” Gauge?
Thx
Welcome to the Hatteras Owners Forum & Gallery. Sign Up or Login
+ Reply to Thread
Results 1 to 5 of 5
-
02-23-2024 08:28 PM #1Registered Member
- Join Date
- Feb 2022
- Posts
- 43
“Drive Temp” Indicator Illuminated on System Monitor panel
PJT
”GRACE”
1980 53’ Hatteras MY
#580
-
Re: “Drive Temp” Indicator Illuminated on System Monitor panel
If you have a ZF clutch, The temp sender is on the bottom left of the sump.
However, I'm afraid you are having a ghost Hatterass Monitor false alarm issue.
Where in FL are you hiding?
In S FL, these kids can come out to help;
https://hatterassystemsmonitor.com/Last edited by Captain Ralph; 02-23-2024 at 08:38 PM.
-
Re: “Drive Temp” Indicator Illuminated on System Monitor panel
Drive temp means the gear. First thing to do with any alarm is verify whether it is real or a false alarm. If you you don’t have a temp gauge for your gears, check the gear oil temp with an IR gun. You could have a clogged gear cooler, a slipping clutch etc.
Pascal
Miami, FL
1970 53 MY #325 Cummins 6CTAs
2014 26' gaff rigged sloop
2007 Sandbarhopper 13
12' Westphal Cat boat
-
02-24-2024 08:46 AM #4Senior Member
- Join Date
- Jan 2023
- Posts
- 167
-
Re: “Drive Temp” Indicator Illuminated on System Monitor panel
Check to see if the wire connections are tight on the temp switch. You can bypass the switch by connecting the wires together. If it still alarms, its not the switch. Then its probably broken solder runs on the 12pt monitor board. I have a board and temp switches if you need them.
Sky Cheney
1985 53EDMY, Hull #CN759, "Rebecca"
ELYC on White Lake--Montague, MI