Electrical Selector Knobs

[mkh8911]

Thank you for all your suggestions. It will be a week or so until I make it back to the boat to get a better idea of what I'm dealing with. After thinking about it more, it seems that if there is a compression ring I should still be able to pull the shaft back to it's original position until it hits the compression ring. I'll post what I find. Thanks again.

[mkh8911]

Success! I did as some of you suggested and just pulled the shafts back into position.I took a couple of tries since I did not know what position the switch was in but all is well now. I have circuits working now that I thought I would have to tear a wall out to get to.

Thanks all!!!