I am trying to learn about shaft seals, and adjusting them.
I continually have 3-4 inches of water in the engine bilges and there is always a concern of what happens if a bilge pump goes down.
Is a dry bilge possible with regular shaft seals? How much water should be in the bilge, is it normal to have a few inches? I'm guessing I need to check them, possible tighten them or repack them.
Is repacking something you have to do on land?
Thanks for any input!
Currently in inside heated water well and lining up my winter projects.
Welcome to the Hatteras Owners Forum & Gallery. Sign Up or Login
+ Reply to Thread
Results 1 to 10 of 19
Thread: Shaft seals, dry bilge?
-
01-28-2023 02:00 PM #1Senior Member
- Join Date
- Jul 2020
- Posts
- 1,185
Shaft seals, dry bilge?
1980 53' Hatteras MY, Hull # 592
"Moon River" <-- Finally picked a name
-
Re: Shaft seals, dry bilge?
Regular packing glands should drip a little while underway. I built little boxes under my shaft stuffing with their own little bilge pumps. Works fantastic. I now just have a little bit of water in the boxes but the rest of the bilge stays dry.
Mahalo V
1974 53 Motoryacht
Hull Number 406
San Diego, Ca. Ready 32 Nordic Tug, Brunswick Ga.
-
Re: Shaft seals, dry bilge?
Conventional shaft logs should barely drip when just sitting, maybe a few drops a minute or so so it should not add up to inches of water. You can measure the volume but putting a plastic box under the shaft logs and see how quickly they fill
Water usually comes from a number of sources including cleaning strainers, air con condensation etc.Pascal
Miami, FL
1970 53 MY #325 Cummins 6CTAs
2014 26' gaff rigged sloop
2007 Sandbarhopper 13
12' Westphal Cat boat
-
01-28-2023 04:15 PM #4Senior Member
- Join Date
- Jul 2020
- Posts
- 1,185
Re: Shaft seals, dry bilge?
I like the idea of a separate collection box.
I think I'm getting more like a drip a second, so I need to tighten it up and see what happens.
Thanks for the input!1980 53' Hatteras MY, Hull # 592
"Moon River" <-- Finally picked a name
-
Re: Shaft seals, dry bilge?
I have the dripless shafts and my bilge has dust in it because it’s so dry. Not bragging. A little pricey but worth every non- drop.
SEVEN
1979 53' MY Hull #563
Antioch, California
-
Re: Shaft seals, dry bilge?
Our Bertie, the shaft logs drip a bit while operating. What they do pass lands in a small sump in the engine room keel sump. 1/4" PTFE Flax.
Now the rudders, after 44 years, are always leaking.
In the middle of a promising red-neck experiment that I will post in a few more week.
-
01-28-2023 08:48 PM #7Senior Member
- Join Date
- Jul 2019
- Posts
- 482
Re: Shaft seals, dry bilge?
I recently pulled out all of my shafts conventional packing and replaced it with the Dura Max Ultra X. I put everything back together as loose as possible. The directions say to let them drip for several hours of operation before tightening them up. I haven't done that yet and my bilge is already dry after a a day or two of sitting. I will know more about how it performs as the weather warms up.
Eddie Clemons Nashville, TN Southern Pride 1988 52CHATCS441K788 2004 Caterpillar 3406e's
-
01-29-2023 11:31 AM #8Senior Member
- Join Date
- Jul 2020
- Posts
- 1,185
Re: Shaft seals, dry bilge?
How much $ are the drippless shaft seals?
Is there a brand that can NOT catastrophically fail and sink your boat?1980 53' Hatteras MY, Hull # 592
"Moon River" <-- Finally picked a name
-
Re: Shaft seals, dry bilge?
I personal know of 2 boats that have sunk do to improperly installed PSS shaft seals. Having said that if the PSS seals are properly installed I think they are great. Tides also makes a good seal system that uses a lip seal.
Mahalo V
1974 53 Motoryacht
Hull Number 406
San Diego, Ca. Ready 32 Nordic Tug, Brunswick Ga.
-
01-29-2023 12:03 PM #10Senior Member
- Join Date
- Jul 2020
- Posts
- 1,185
Re: Shaft seals, dry bilge?
1980 53' Hatteras MY, Hull # 592
"Moon River" <-- Finally picked a name