Easier and cleaner to use a wet dry vacuum to suck it dry.
Welcome to the Hatteras Owners Forum & Gallery. Sign Up or Login
+ Reply to Thread
Results 11 to 18 of 18
-
Re: Galley Maid Toilet stops working - seems pumpout related
SEVEN
1979 53' MY Hull #563
Antioch, California
-
Re: Galley Maid Toilet stops working - seems pumpout related
The um “water” isn’t very clean. I wonder does the water sit at the stator until it’s flushed? I have an old shop vac I’m gonna trash so if I suck up the “water” from the bowl will it empty the big hose or just the bowl.
ENUFF. 1983 53MY.Hull #617 Barnegat Light Nj.
-
Re: Galley Maid Toilet stops working - seems pumpout related
Correct. It stops at the stator. If you plug up the vacuum cleaner hose around the sides you will be able to suck out all the water all the way through to the stater. Don’t forget to turn off your water that’s coming into the pump before you disconnect it to work on it.
SEVEN
1979 53' MY Hull #563
Antioch, California
-
Re: Galley Maid Toilet stops working - seems pumpout related
Well it was the stator, it took longer to empty my bowl than to replace stator. After a few flushes I’m back in business. I should have ordered the rotor too as mine is plastic but it’s easy enuff to swap out if I need to.
ENUFF. 1983 53MY.Hull #617 Barnegat Light Nj.
-
-
Re: Galley Maid Toilet stops working - seems pumpout related
I prefer the plastic as well. The brass ones pit so badly after a few years.
SEVEN
1979 53' MY Hull #563
Antioch, California
-
Re: Galley Maid Toilet stops working - seems pumpout related
That’s good to know, I’ll keep my plastic one then. I will order a spare of each to keep aboard.
Raz marine was great to deal with and got my stuff in 3days.ENUFF. 1983 53MY.Hull #617 Barnegat Light Nj.
-
Re: Galley Maid Toilet stops working - seems pumpout related
Also the water pump on the other end requires a different rotor and stator (same seal) and probably should have been replaced at the same time.
To further mess everybody up, GM makes just water pumps and sanitation treatment pumps. Mostly the same size these can use different rotation stators and rotors. Keep this in mind when R & L are used in the part numbers. Been here, lost my T shirt...