Who makes these LED's and External Driver?

[HeavyDuty-Systems]

Does anyone know the make of these LED's or this external driver that controls the power supply? Its not a dimmer control. There is no brand or number on either device. 2008 38 Cabo express. light.jpgDriver.jpglight.jpgDriver.jpg

[Cricket]

Think I would start with contacting DRSA in North Palm Beach.
The metal part of that fixture looks very similar to some of their fixtures we used to have.
If not they can probably put you on the right track.
www.https://www.drsa.com/
Phone 561 842 5704

[Captain Ralph]

You talked to Sam's parts yet?

[HeavyDuty-Systems]

Spoke with sams parts. Its not original to any Cabo.

[Cricket]

All of our lighting is now LED. Imtra in the salon and heads because they had the correct sizes for our cutouts. Lumitec Moray Flex LED under all valances and gunnel, which is really great. Quick Marine for all of the bedrooms and companionway.
Lumitec in the hardtop and bridge overhang. DRSA in the engine room.
Lumitec underwater fixtures in transom.
Some on 110v transformers, some 24v DC.
All of the Lumitecs dim and or change color with cycling the on/off switch.
For all other dimming we're using DC dimmers from Blue Seas operated via Vimar momentary push switches, one for brighter, one for lower.
Everything is using just 2 wires, no separate dimming wires.

[HeavyDuty-Systems]

Thank you all for the reply. They are DSRA and I was able to find the replacement driver on LED supply.com.