Not in a Hatteras but since there are many Detroit fans here I figure i d post a few pics of the office starboard engine rebuild
Started on Tuesday.. they already have all the turbos, manifolds and all 16 heads off. Found traces of coolant leakage in four aft cylinders. Still minimal and didn’t get into the cylinder but only a matter of time according to the mechanics. Engine has 3800 hours. Reason for rebuild was oil sample showing fuel trace in the oil and main bearing wear. Port was rebuilt last year. 4000 hours is pretty normal on these… next they’re going to drop the pan, and pull the pistons/liners out.
Welcome to the Hatteras Owners Forum & Gallery. Sign Up or Login
+ Reply to Thread
Results 1 to 10 of 26
Thread: MTU 16V2000 in frame
Hybrid View
-
MTU 16V2000 in frame
Pascal
Miami, FL
1970 53 MY #325 Cummins 6CTAs
2014 26' gaff rigged sloop
2007 Sandbarhopper 13
12' Westphal Cat boat
-
Re: MTU 16V2000 in frame
Cylinders and pistons
Pascal
Miami, FL
1970 53 MY #325 Cummins 6CTAs
2014 26' gaff rigged sloop
2007 Sandbarhopper 13
12' Westphal Cat boat
-
Re: MTU 16V2000 in frame
So each cylinder has its own head?
1966 34c
1982 46 HP
-
-
06-30-2022 12:30 PM #5
Re: MTU 16V2000 in frame
The Miami guys really get it done on engine rebuilds, it's a whole different mindset down there. When I needed my engines rebuilt all the local companies in Jacksonville had 3-6 month wait lists, and that's if you could even get them to show up or call you back to begin with. I said screw it and got guys from down there and paid extra for travel. They had everything done in a month and a half. That's despite anything that could go wrong did go wrong (like turbo housings were too far out of spec so needed new turbos, some rotten exhaust components that there was a wait on parts, a ton of stuff like that).
If I'd used anybody local I might have been back on the water by Christmas if I was lucky.
-
Re: MTU 16V2000 in frame
Better at least. It took 10 months to get our 8v92 overhauled in the most God forsaken place there is to get any work done on a boat - Savannah, Ga.
It ran 349 hours before it sh*t the bed, at least we got it home. Called up Interstate Power out of Milwaukee, took 2 1/2 weeks from the time they first wrenched on it until the sea trial for a complete overhaul including them rebuilding one of the heads in house. Even at that they apologized because they had to work on another job for 5 days they had previously committed to during that time.
My father-in-law asked me at the time what I thought of them, I told him I didn't think they knew what they were doing - the lead mechanic called me at 6:45 am one morning, he was already on the boat & had been working for a while LOL.
That was in 2019, maybe a totally different story now, I don't know. Just saying it doesn't have to take months & months if they have a work ethic.