Finally launched the boat this weekend, being delayed by barrier coating, etc...
Checked the shifters and the control seemed weird, turned out the port transmission was stuck in gear.
Turned out the be the clamp holding the cable jacket was a little loose, and I snugged it up and it was good enough to move the boat to the dock, but, it was all rusty and I am wanting to replace all of those clamps now.
Not sure what to go with, but the most promising thing, imo, is the stainless steel version from SBMAR:
https://www.sbmar.com/product/smx-st...lamp-shim-kit/
vs
https://www.defender.com/product.jsp...033&id=3857424
The Seaboard Marine product looks a lot nicer, and I think anything made for the 33C or 3300 series stuff would work?
Welcome to the Hatteras Owners Forum & Gallery. Sign Up or Login
+ Reply to Thread
Results 1 to 2 of 2
Thread: Morse Control clamps
-
06-13-2022 11:08 AM #1
Morse Control clamps
Brett Portzer 1972 Hatteras 43DC331
2019- SUPERNOVA Waterford, NY
1977-2019 CAROL-SUE Baltimore, MD
1972-1977 C.VALPRISANN IV Boston, MA
-
Re: Morse Control clamps
Great choice. I’d pick the same.
SEVEN
1979 53' MY Hull #563
Antioch, California