Pair of michigan wheel dqx nibral 24x25x1.75 propellers $3,000

[warrenw]

SOLD


I have a set of Michigan Wheel DQX propellers for sale. They are Nibral with 24" diameter, 25" pitch and bored for a 1.75" shaft. They are in great shape and never used after being reconditioned. They were spare props aboard a 44' Carver that was a freshwater boat. I picked these up for my repower project based on a miscalculation. I am asking $3,000USD + shipping at buyers cost, which I think is reasonable for the pair. The cheapest I have found online is Deep Blue Yacht Supply for $2875 ea new. The props are located in Toronto and I am willing to pack properly for shipping. I work with a good freight forwarder so shipping costs to the USA should be reasonable.

[drburke]

Don't forget this division of SAM's:
https://www.propellerplace.com/

DAN

[warrenw]

Don't forget this division of SAM's:
https://www.propellerplace.com/

DAN

Thanks for the reminder!

[Bob Bradley]

Seems like a decent deal to me. I'd certainly pay that if they fit my 2" shafts.

[TomT13]

Are these still available? My props are 24x26 1.75 shaft but these may be a good spare set.

[drburke]

I missed Bob's remark, but for the record often if the hub is large enough they can be re-drilled for a new shaft.

I am in the process of having some 1.75" drilled out to 2" taper.

These are certainly a bargain for someone...

DAN

[warrenw]

Tom,

Yes, the props are still available.

Are these still available? My props are 24x26 1.75 shaft but these may be a good spare set.

[jim rosenthal]

Were these wheels scanned during the process of reconditioning them? Prospective buyers might be interested in viewing the scans if that information was available.

[warrenw]

Jim,

That's a great question and unfortunately I am not sure if they were scanned, as the previous owner had them done. However, the two most popular inboard prop repair shops here in Southern/Central Ontario, United and Kawartha, offer scanning services, so it is quite possible they were scanned during reconditioning.

[TomT13]

I was looking for 24x26 and these are close but don't know if I can get an inch of pitch put into them. I was thinking of them as a spare set of props.