Thanks! I saw an old picture or two of this genny and a single wire headed back to that riser. So, I scoured that area, over and over, looking for it and there isn't a plug for it. All the hoses have been replaced over the years and that riser doesn't look more than a decade old. They must've replaced it without the sensor....and shut the need for it off somehow.
Welcome to the Hatteras Owners Forum & Gallery. Sign Up or Login
+ Reply to Thread
Results 31 to 33 of 33
-
Re: Onan Generator stalls after oil/filter change
At the mouth of the Caloosahatchee
1984 52C
-
03-30-2022 09:10 PM #32Registered Member
- Join Date
- Nov 2017
- Posts
- 15
Re: Onan Generator stalls after oil/filter change
Check the heat exchanger for leaks
-
06-23-2022 07:26 PM #33
Re: Onan Generator stalls after oil/filter change
I thought I would build on this thread in that I am experiencing several of the well known Oh No issues starting with not wanting to remain running after main filter change. I discovered a fuel leak at the pump so it's time to go electric. I have a 20kw MDL4
Dilemma: 1. manual says 12v system, nope! 36v at the starter.
2. manual shows gph at half/full load but I see no pressure specs
anyone who has used a 24v pump on an MDL4 care to share the specs on the pump you converted to? Anyone who might know the pressure specs?
I also have a leak from a screw or adjustment above the injector lines on the injection pump housing, I was going to remove it and attempt to find a replacement o-ring. One member mentioned doing this in another thread, hopefully he'll chime in.'88 55'C hull 394 BEATs Therapy
12-71 TA's ZF BW190 1.5:1 gears