Welcome to the Hatteras Owners Forum & Gallery. Sign Up or Login

Enter partial or full part description to search the Hatteras/Cabo parts catalog (for example: breaker or gauge)
+ Reply to Thread
Results 1 to 4 of 4
  1. #1

    MAN R6 800's 38 Cabo

    I just purchased a 2008 Cabo 38 with R6 800ís. Thereís an obnoxious amount of vibration at idle throughout the entire boat, Even when itís warmed up.. as well as troll mode. when I put the rexroth in throttle only mode, as soon at hits 800 rpms, they smooth out like a sewing machine. You barley know theyíre running. The isolators are MAN and for the correct weight of the engine. Does MAN cut out a cylinder at idle and turn all injectors on at 800 rpm +? Anyone with a 38 or 40 with this power have the same vibration?

  2. #2

    Re: MAN R6 800's 38 Cabo

    Look over those 13 year old mounts very carefully. They may have settled and not isolating vibrations.
    Check the shaft log height also.
    The MAN R6s are very smooth engines. I do not believe they cut out cylinders at idle.
    Was this vibration noted on the engine survey?

  3. #3

    Re: MAN R6 800's 38 Cabo

    Good point. I will certainly check the isos closer. The vibration was noted as normal. Iím Not sure what you mean by the shaft log height and how that plays into vibration at idle.

  4. #4

    Re: MAN R6 800's 38 Cabo

    Quote Originally Posted by HeavyDuty-Systems View Post
    Good point. I will certainly check the isos closer. The vibration was noted as normal. I’m Not sure what you mean by the shaft log height and how that plays into vibration at idle.
    As the mounts settle, the shafts get a lil lower in the logs also.
    Pending your log gland type, you may see the log hose tilting down and find the shaft just touching (dancing with vibration) on the log tube, forwarding a read hard vibration into the boat.
    Yes, it happens.
    Putting in gear and applying torque to the engine, may rock it over a little and the shaft does not dance on the shaft tube bottom.
    Yes, this happens also.

    Pending the mount, some of the mounts have a height reference built in. Others may need the mfg spec to check height.

    vibration was noted as normal
    Noted by a real MAN rep?

    Did the supposed MAN rep measure the mount heights? They don't usually but if the vibration was questioned during survey, he may have checked.

    Of course, I'm not there and just throwing ideas at you. It could be just normal and you need to just go fishing.

    What part of the world are you in?
    Last edited by Captain Ralph; 11-23-2021 at 10:49 PM.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts