Marquipt Tender Lift 1000-1500# capacity on recently purchased Hatteras 61 my. Remote will only raise cable no matter which button i push up or down. Lift is currently in down position and cable is hooked to latch on flybridge and taunt, I cannot release. How can I release cable in order to release pressure and raise boom to inspect for repairs? Have removed rear cover and don't see any obvious way to release cable... TIA!!!!!!
Welcome to the Hatteras Owners Forum & Gallery. Sign Up or Login
+ Reply to Thread
Results 1 to 4 of 4
-
11-07-2021 11:59 AM #1Senior Member
- Join Date
- Aug 2021
- Posts
- 71
Marquipt Tender-Lift up/down issues
-
Re: Marquipt Tender-Lift up/down issues
Start with the remote. Open it up, check the down switch and try bypassing it. Many davit issues I ve had over the years were caused by the remote.
Pascal
Miami, FL
1970 53 MY #325 Cummins 6CTAs
2014 26' gaff rigged sloop
2007 Sandbarhopper 13
12' Westphal Cat boat
-
11-07-2021 02:25 PM #3Senior Member
- Join Date
- Aug 2021
- Posts
- 71
Re: Marquipt Tender-Lift up/down issues
Problem solved…. Must hold remote down button Dow for a couple of seconds before it reacts and begins to lower…. When button is released there is a momentary change in direction to up so when I initially pressed and saw no movement I released and cable tightened each time…
-
11-08-2021 07:56 AM #4
Re: Marquipt Tender-Lift up/down issues
The momentary pause in the down mode is a safety feature.
Dave & Trina
Benedetto
1989 60MY HATDK310
Sturgeon Bay/Ft. Lauderdale