Taco Marine A11-0152TAL12D-A Aluminum Rub Rail, Drilled, 7/16"W X 1"H X 12'L
10 12' sections bought to do the 1" J trim that goes around the bottom drip edge on the flybridge cap on 80s and some 90s boats.
This was enough to do a 1985 61MY.
Located at the Venice Florida Airport. They are 12' long so shipping gets expensive. They are
still in a shipping tube and wrapped. p/u preferred
Retail is $136.41 a piece
SOLD SOLD SOLD
.Taco1.jpgIB00119609.jpgTaco2.jpg
Welcome to the Hatteras Owners Forum & Gallery. Sign Up or Login
+ Reply to Thread
Results 1 to 2 of 2
-
Fly Bridge J channel trim by Taco Marine
Last edited by Capndan; 10-12-2021 at 09:54 AM.
-
10-12-2021 09:49 AM #2Senior Member
- Join Date
- Jun 2012
- Posts
- 520
Re: Fly Bridge J channel trim by Taco Marine
I sent an email about the purchase.
JMooney
61 MY 1983 #341
“Jerrie”
Miami , FL