Welcome to the Hatteras Owners Forum & Gallery. Sign Up or Login

Enter partial or full part description to search the Hatteras/Cabo parts catalog (for example: breaker or gauge)
+ Reply to Thread
Results 1 to 10 of 12

Hybrid View

  1. #1

    40 foot aft cabin draft

    I looked at a 1996 40 aft cabin and the broker said the boat had a draft of 4' 9" is this correct. If this is correct it is to much for my marina.
    Thanks Sam

  2. #2

    Re: 40 foot aft cabin draft

    That can’t be right, the 53’s only have a draft of 4’ and they’re a lot heavier. I’d guess more like 3’

  3. Re: 40 foot aft cabin draft

    The buyers guide from the brochures page says 4’ 9”
    Beachcomber
    Former 3 Hat owner
    Home port Paducah, KY

  4. #4

    Re: 40 foot aft cabin draft

    I just purchased a 1987 40 aft. The catalog says 4'9" but the guy I bought it from swears its closer to 3'. It came from the S Shore of LI where the waters are shallow, and I only hit the sandy bottom once and just barely in the Moriches bay on my way to CT. He says he never would have bought it if it was that deep of a draft and he is a lifelong boater. I know this is not a conclusive answer BUT i do plan to measure mine as soon as I can and I will let you know when I do. I think the hulls were basically the same in 87 through the 90s.

  5. #5

    Re: 40 foot aft cabin draft

    I just sold my 1987 40' double cabin. With twin Crusaders and a 6,5 KW Onan, draft was around 4'6".Remember the weight of the fuel, fresh water, waste water and gear can make a difference. It is not anywhere near 3'
    BobWaz
    1987 40 DC #322
    Knot Again!
    Champlain, NY

  6. #6

    Re: 40 foot aft cabin draft

    Thank you for your help, I can work with a draft of 3' 8" no more.
    I can't make a offer till I know.
    Thanks Sam

  7. #7

    Re: 40 foot aft cabin draft

    Quote Originally Posted by Jonaron View Post
    I just purchased a 1987 40 aft. The catalog says 4'9" but the guy I bought it from swears its closer to 3'. It came from the S Shore of LI where the waters are shallow, and I only hit the sandy bottom once and just barely in the Moriches bay on my way to CT. He says he never would have bought it if it was that deep of a draft and he is a lifelong boater. I know this is not a conclusive answer BUT i do plan to measure mine as soon as I can and I will let you know when I do. I think the hulls were basically the same in 87 through the 90s.
    I promise you it's not closer to 3. Don't find out the hard way. Just saying.
    Randy Register - Kingston, TN
    www.yachtrelocation.com
    www.Safes4Guns.com
    aka Freebird aka Sparky1
    1965 41DC #93

  8. #8

    Re: 40 foot aft cabin draft

    Hi my 1989 40 DC (gas engines) has a draft of at least 4'6". when fully loaded with fuel, water, and supplies it needs a little more space. I will not go anywhere with out at least 5' of water and I prefer a minimum depth of 6'. the propellers are the lowest point on the boat (not the keel). I take my boat out of the water each winter and I can assure you it has a measured draft of at least 4'6".

    Mark
    Lake of the woods
    1989 40 DC

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts