Need to replace shaft seal in leaking helm pump (H21S), and stalled almost immediately trying to remove the wheel to drop the pump. The key moved freely, and the wheel moved about 3/16” on the shaft, but now won’t budge. Thought I would check here that I haven’t missed some secret pin or set screw before I go get a bigger persuader. TIA
Welcome to the Hatteras Owners Forum & Gallery. Sign Up or Login
+ Reply to Thread
Results 1 to 10 of 12
Thread: Wheel removal
Hybrid View
-
01-15-2021 05:46 PM #1
Wheel removal
Mike Peters, 1985 43MY, Cat 3208T, Blue Bayou; 2011 Key West 246BR, F250, Baby Blue; Punta Gorda FL
-
Re: Wheel removal
Put a little lubricant on the shaft and let it sit for a bit. You’ve done everything correct so far.
SEVEN
1979 53' MY Hull #563
Antioch, California
-
Re: Wheel removal
However, make sure that somebody is holding the pump from underneath when you finally take off the wheel, because it could drop like a rock.
SEVEN
1979 53' MY Hull #563
Antioch, California
-
01-15-2021 08:13 PM #4
-
01-15-2021 08:31 PM #5Senior Member
- Join Date
- Apr 2005
- Posts
- 3,531
Re: Wheel removal
I had to use a puller the first time I took mine off, 9 or 10 years ago. Did it again last year and it slid right off no problem. '79 43C.
Everyone should believe in something - I believe I will go fishing - Henry David Thoreau
-
01-15-2021 11:18 PM #6
Re: Wheel removal
Yep, puller would be my next move.
1978 53' Motor Yacht "LADY KAY V"
Hull number 524
Chesapeake Bay