Welcome to the Hatteras Owners Forum & Gallery. Sign Up or Login

Enter partial or full part description to search the Hatteras/Cabo parts catalog (for example: breaker or gauge)
+ Reply to Thread
Page 3 of 3 FirstFirst 1 2 3
Results 21 to 28 of 28
  1. #21

    Re: 1968 Firebird 400

    After a "fun" car show in Madeira Beach this weekend the FireChicken is headed to Cape Cod for the summer. May leave it there for a next summer too. Bought a new 20' flatbed car hauler because rentals are crazy expensive. Trailer is very well constructed and will also be for sale once the car is sold or back in FL. I made a fact sheet for the car to put in window at the show. Copy/paste below.

    1968 FIREBIRD 400 4 SPEED MANUAL

    ENGINE BLOCK IS 1973 185HP Y4 block date code 72 with 4X heads 2 BARREL
    WAS REBUILT WITH 8 EYEBROW PISTONS SO GOOD STARTING POINT

    CAR RAN LIKE IT HAD A POTATO STUFFED UP THE EXHAUST WHEN I GOT IT

    CURRENT CONFIGURATION
    1969 "48"CASTING HEADS (THESE CAME WITH ANOTHER 68 400 I HAD IN 1985)
    HEADS SAT ON END IN CAPE CODE BASEMENT FOR 34 YEARS AND WERE STILL GOOD
    CHEAP HOLLEY (QUICK FUEL) 600 CFM 4 BARREL CARB (CAN'T FIND A REAL Q-JET TUNER)
    HOOKER HEADERS (MUST HAVE BECAUSE THAT’S WHAT I HAD BACK IN THE DAY)
    X PIPE EXHAUST
    COMP CAM "MAGNUM MUSCLE" (TORQUE CAM)
    9.5 CR, RUNS ON 93 MINIMUM
    ESTIMATED HP IS 350 OR SO BUT NOT DYNO TESTED. FUN FACTOR ABOVE AVERAGE!
    ONLY RUN ON 93 ETHANOL FREE SINCE PERFORMANCE IMPROVEMENTS

    4 SPEED MUNCIE M-21 TRANNY (REBUILT, WAS IN GOOD SHAPE)
    NEW HURST SHIFTER (ORIGINAL "FACTORY" HURST KEPT ENDING UP IN 1ST AND
    REVERSE AT THE SAME TIME, STALLING THE ENGINE)
    HURST T-HANDLE SHIFTER

    POSI TRACTION (WAS 1 LEGGED)
    CHANGED TO CORRECT RATIO GEARS 3.55

    CAR WAS ORIGINALLY BLACK WITH RED INTERIOR
    REPAINTED RED WITH CUSTOM SHADOW EMBLEMS

    WHAT DOES IT NEED???
    ORIGINAL Q-JET REBUILT AND TUNED BY QUALIFIED MECHANIC
    DISC BREAKS, THE DRUMS ARE WEAK, PULLS TO RIGHT IN HARD BRAKING
    ONLY KNOWN "BONDO" SPOT IS A NICELY DONE (BUT WRONG) SMALL SPOT TO
    DAMAGED RIGHT REAR BOTTOM QUARTER PANEL.

    OTHER THAN THAT SHE'S A RIPPA!

    ALSO DRINKS GAS LIKE A BOAT.

    Thought you guys would like that last part.
    1966 34c
    1982 46 HP

  2. #22

    Re: 1968 Firebird 400

    Car is now available for sale. If not sold this fall will be garaged on Cape Cod until spring and then used occasionally until sold.

    $38,000.
    1966 34c
    1982 46 HP

  3. #23

    Re: 1968 Firebird 400

    Calling Lester Burnham

    https://youtu.be/qw0kuEG7NR8
    Last edited by rsmith; 08-26-2021 at 09:52 AM.
    "DON'T BELIEVE ANYTHING YOU READ OR HEAR AND ONLY HALF OF WHAT YOU SEE" - BEN FRANKLIN




    Endless Summer
    1967 50c 12/71n DDA 525hp
    ex Miss Betsy
    owners:
    Howard P. Miller 1967-1974
    Richard F Hull 1974-1976
    Robert J. & R.Scott Smith 1976-present

  4. #24

    Re: 1968 Firebird 400

    Who do you think told me to buy it? Griswold talked me into my RV! These guys are convincing 
    Last edited by madhatter1; 08-26-2021 at 02:42 PM.
    1966 34c
    1982 46 HP

  5. #25

    Re: 1968 Firebird 400

    Quote Originally Posted by madhatter1 View Post
    Who do you think told me to buy it? Griswold talked me into my RV! These guys are convincing 
    “Where’s the Camry” lol
    "DON'T BELIEVE ANYTHING YOU READ OR HEAR AND ONLY HALF OF WHAT YOU SEE" - BEN FRANKLIN




    Endless Summer
    1967 50c 12/71n DDA 525hp
    ex Miss Betsy
    owners:
    Howard P. Miller 1967-1974
    Richard F Hull 1974-1976
    Robert J. & R.Scott Smith 1976-present

  6. #26

    Re: 1968 Firebird 400

    Well spring is around the corner and making plans to get up to the Cape to get the car into a speed/classic shop I found. The do classics, restorations, and build high HP race engines. Good find. Anyway I dropped the car off last September for them to tune out a hesitation off idle and a few other things. Guy asks me whats my story about what I have in the engine. After we talk he says okay, 325, Maybe 350 HP but expects it do be a decent runner.

    Go to pick up and I ask him what do you think. He says your car really surprised me. Kinda fast. Easy 400 HP. Says that with the current carb and stock intake it chokes after XX RPM. 650 double pumper and new intake are 40-50 east bolt on HP. More like fix the restrictions.

    Nice, drive home and for $300 the hesitation is almost non existent, the car drives straighter and tight (rough alignment, car was a little cross eyed), and way quieter. He put in little missing tension springs, adjusted clutch, just a whole bunch of minor odds and ends that made a huge difference. So car will go in for new radiator, carb (including tuning), intake, front disc brake conversion, remove timing gear/replace with chain, device to reduce power steering power (for better feedback), a true alignment, and then whatever minor things it needs.

    Still plan on selling later this year if anyone is interested. But have to punish the rear tires some before doing so.
    1966 34c
    1982 46 HP

  7. #27

    Re: 1968 Firebird 400

    Quote Originally Posted by madhatter1 View Post
    Here is one pic. Easier to text or email.
    That is a rare and wonderful work of art...
    "A smooth sea never made a skillful sailor"

    Rob Waldrop
    M/V Pau Hana
    Ft Myers FL

  8. #28

    Re: 1968 Firebird 400

    You need a set of Webers. I just put four of them on a 302 Ford engine, which ran great on a single four-barrel. But the throttle response with Webers is amazing.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts