Welcome to the Hatteras Owners Forum & Gallery. Sign Up or Login

Enter partial or full part description to search the Hatteras/Cabo parts catalog (for example: breaker or gauge)
+ Reply to Thread
Results 1 to 8 of 8
  1. #1

    Which fuse block for hydraulic rams 35' Cabo that raise helm?

    Apparently this boat had it replaced and not only did the guy not use the same fuse block, he wired it to bypass the fuse he bought to replace the bad one.

    Would anyone know which fuse block or type of breaker should be there as original that mounts there to the left on that platform somehow?

    Tried posting pic but can't for some reason. Anyway, it's just to the port side around corner/aft of generator.

    Thanks in advance.

    J
    Last edited by HP12Sea; 09-16-2020 at 05:59 PM.

  2. #2

    Re: Which fuse block for hydraulic rams that raise helm?

    Is this on a Cabo? What year/model?
    Sky Cheney
    1985 53EDMY, Hull #CN759, "Rebecca"
    ELYC on White Lake--Montague, MI

  3. #3

    Re: Which fuse block for hydraulic rams that raise helm?

    Sorry, rookie move leaving out that critical info.

    Thanks for responding.

    '05 35 Cabo

  4. #4

    Re: Which fuse block for hydraulic rams that raise helm?

    Lil' Bump in case anyone knows and was able to add pic now.

    I think the orientation is wrong on the pic but there's a little ledge to the left that has three holes in it where the old fuse would go. Two smaller holes ones by the edge and one larger in middle.

    Looks like o O o in that semicircular ledge.

    Just wish I know what type and size fuse would go there since the current set up es no bueno.

    Thanks again.

    J
    Attached Images
    Last edited by HP12Sea; 09-11-2020 at 05:16 PM.

  5. #5

    Re: Which fuse block for hydraulic rams that raise helm?

    That's not hooked up as a fuse.

    Its a standard ami type fuse.if memory serves
    Scott
    41C117 "Hattatude"
    Port Canaveral Florida.


    Marine Electronics and Electrical Products Distributor.

  6. #6

    Re: Which fuse block for hydraulic rams that raise helm?

    Thanks. For some reason I thought it was to be some kind of circuit breaker and not a fuse.

    Now I wonder if I got confused and the guy was just talking about replacing the fuse but that entire set up attaches to that ledge and it just needs to have the right fuse inserted. Like you said, the std AMI.

    Not sure where I got the circuit breaker idea from.

    Thanks, I'll measure the holes to see if it fits to what's there now and maybe go with it. Just wire it so the fuse in inline instead of the way it is now.

  7. #7

    Re: Which fuse block for hydraulic rams that raise helm?

    Just in case someone comes along looking for the same (highly unlikely, but ya never know).

    Found it: Klixon SDLM-105 - circuit breaker.

    Actually, surprised it's so high but confirmed with two boats. Both Cabos of different vintages but both had 105's. '05 style of breaker was dif than the 36' '07s but both 105 amp.

    Thanks again all,

    J
    Attached Images

  8. Re: Which fuse block for hydraulic rams that raise helm?

    Thanks for creating such a useful thread.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts