Parts came off of a 1967 50MY. All the stainless rubrail for port and starbord. This is NOT the rail from the Gunnal but from the long and short rubrails on the sides. I have completely removed them. The fiberglass piece is for the port side only and was a replacement to the original wood. It is the short bottom piece. I do not have the starbord side.I also have the helm chair from the salon that I no longer need.Located in Cape Canaveral FLLocal pickup only.Make me an offer!!
Welcome to the Hatteras Owners Forum & Gallery. Sign Up or Login
+ Reply to Thread
Results 1 to 4 of 4
-
08-12-2020 07:27 AM #1Registered Member
- Join Date
- Mar 2020
- Posts
- 16
Stainless rubrail and fiberglass port lower rubrail
-
Re: Stainless rubrail and fiberglass port lower rubrail
Sent PM
"DON'T BELIEVE ANYTHING YOU READ OR HEAR AND ONLY HALF OF WHAT YOU SEE" - BEN FRANKLIN
Endless Summer
1967 50c 12/71n DDA 525hp
ex Miss Betsy
owners:
Howard P. Miller 1967-1974
Richard F Hull 1974-1976
Robert J. & R.Scott Smith 1976-present
-
08-14-2020 06:40 AM #3Registered Member
- Join Date
- Mar 2020
- Posts
- 16
Re: Stainless rubrail and fiberglass port lower rubrail
All parts sold!
-
Re: Stainless rubrail and fiberglass port lower rubrail
Thanks Shaun! Shaun is doing a complete refit on a 67 50MY. Rebuilding the 8/71’s and gutting the interior. Got to see the and tour the boat. Cool guy! Good luck with the project.
"DON'T BELIEVE ANYTHING YOU READ OR HEAR AND ONLY HALF OF WHAT YOU SEE" - BEN FRANKLIN
Endless Summer
1967 50c 12/71n DDA 525hp
ex Miss Betsy
owners:
Howard P. Miller 1967-1974
Richard F Hull 1974-1976
Robert J. & R.Scott Smith 1976-present