Ok guys, this stuff is Hatteras specific!
Here's what I've got.
TWO EACH NOS (never installed) - Oil pressure (0-80), gear pressure (0-300), temperature (0-220F) gauges
TWO GEAR oil pressure and temperature senders (NOS)
ONE engine oil pressure sender (NOS)
Two 4,000 RPM DIESEL tachometers (USED, off Gigabite)
All AC parts - OEM Hatteras stuff and harder than hell to find.
As in the picture.
Asking $25 for EACH gauge or sender, or take the entire lot for $200, plus shipping.
Note that I cannot guarantee that the NOS stuff works as it is untested. The tachs came off Gigabite when the Floscans were installed, and were in perfect working order. BTW all the gauges are clear - sorry about the glare in the picture - I'll try to get a better one.
The NOS gauges are damn near impossible to find; I bought these a few years ago as a backstop in the event I had some failures, as I didn't really feel like having to redo the entire instrument panel for one bad gauge. As it turns out I never had gauge trouble!
Welcome to the Hatteras Owners Forum & Gallery. Sign Up or Login
+ Reply to Thread
Results 1 to 9 of 9
-
Gauge parts - cleaning out the old garage!
Last edited by Genesis; 05-24-2006 at 09:35 AM.
http://www.denninger.net - Home page with blog links and more
http://market-ticker.org - The Market Ticker
-
Re: Gauge parts - cleaning out the old garage!
Genesis,
I'll take the gauges if no one else has asked. I have several gauges starting to rust on the flybridge. Will send you a PM.
Thanks,
captbuddy
-
05-24-2006 11:15 AM #3Registered Member
- Join Date
- Aug 2005
- Posts
- 35
Re: Gauge parts - cleaning out the old garage!
I will buy all the gages. Please tell me where to send check?? Thanks, Harry Whitehead mariahrental@aol.com
-
Re: Gauge parts - cleaning out the old garage!
Captbuddy has dibs; we're trying to work delivery/payment. Will advise.
http://www.denninger.net - Home page with blog links and more
http://market-ticker.org - The Market Ticker
-
05-24-2006 02:41 PM #5Registered Member
- Join Date
- Aug 2005
- Posts
- 36
Re: Gauge parts - cleaning out the old garage!
ill take the sending units,plese let me know ,,,how much,,,e.t.c...joe 619-294-8666 thanks
-
Re: Gauge parts - cleaning out the old garage!
Already gone (literally - handed over) - talk to the Capt!
http://www.denninger.net - Home page with blog links and more
http://market-ticker.org - The Market Ticker
-
05-24-2006 08:08 PM #7Registered Member
- Join Date
- Aug 2005
- Posts
- 36
Re: Gauge parts - cleaning out the old garage!
capt.buddy,please contact me if you can let go of one trans sending unit,thanks joe
-
Re: Gauge parts - cleaning out the old garage!
Joe,
Check you PM.
captbuddy
-
06-22-2006 09:51 PM #9Registered Member
- Join Date
- Aug 2005
- Posts
- 36
Re: Gauge parts - cleaning out the old garage!
hey capt. any chance of you letting go one of those tranny sending units????please let me know,,,thanks joe