Upon Start All displays work, and are operational, Once brought up to around 1200 RPM. Both Port DDECs go to Zero. After the engines cool, and restart all indications normal. Is this a ECM problem? Any suggestions. This is a DD 16 92 on a 65 Hat
Welcome to the Hatteras Owners Forum & Gallery. Sign Up or Login
+ Reply to Thread
Results 1 to 5 of 5
-
07-06-2020 03:45 PM #1Registered Member
- Join Date
- Jul 2020
- Posts
- 2
DDEC Displays blank on Port stations(2)
-
Re: DDEC Displays blank on Port stations(2)
Sounds like low DC volts.
Your displays on their own batteries?
-
07-08-2020 10:57 AM #3Registered Member
- Join Date
- Jul 2020
- Posts
- 2
Re: DDEC Displays blank on Port stations(2)
Nope. Was looking for a wire diagram on this or how it’s configured.
-
07-08-2020 11:17 AM #4Senior Member
- Join Date
- Apr 2008
- Posts
- 2,003
Re: DDEC Displays blank on Port stations(2)
I would have a look at the connections an grounds.
GLORY Hull # 365
Northport, NY
-
07-08-2020 04:22 PM #5
Re: DDEC Displays blank on Port stations(2)
This may be of help...
https://www.samsmarine.com/forums/sh...highlight=ddecBest regards,
--
David