Kind of like headlight lens on a car. The ones in the master are really crazed.
Welcome to the Hatteras Owners Forum & Gallery. Sign Up or Login
+ Reply to Thread
Results 1 to 10 of 15
Thread: Polishing aft windows in a 53 my
-
05-28-2020 03:01 PM #1
Polishing aft windows in a 53 my
CRAZZZY NUFFF
-
Re: Polishing aft windows in a 53 my
Maybe try using the headlight restorer, who knows it might work.
ENUFF. 1983 53MY.Hull #617 Barnegat Light Nj.
-
Re: Polishing aft windows in a 53 my
I took my transom portlights to a glass shop and had safety glass put in to replace the old plexiglass. They're nice and clear now and have been for the last 15 years.
Sky Cheney
1985 53EDMY, Hull #CN759, "Rebecca"
ELYC on White Lake--Montague, MI
-
Re: Polishing aft windows in a 53 my
Try a line of products called Novus. They have different grades of scratch remover and a cleaner. They also sell a kit with buffing pads that can be used in an electric drill motor. It is fantastic stuff. John
Mahalo V
1974 53 Motoryacht
Hull Number 406
San Diego, Ca. Ready 32 Nordic Tug, Brunswick Ga.
-
Re: Polishing aft windows in a 53 my
Novus is good stuff, but I think the crazing you probably have runs deep. Be surprised if anything will help much.
Semper Siesta
Robert Clarkson
ASLAN, 1983 55C #343
Charleston, SC
-
05-28-2020 09:01 PM #6
Re: Polishing aft windows in a 53 my
you can try sanding them and spraying clear on them. that is what most headlight restorers do
Mis b' havin
1972 58 yachtfish
58yf352
pass christian, ms.
-
Re: Polishing aft windows in a 53 my
I took an orbital sander and a buffing pad and put three different courses of rubbing compound on the windows. They came out about 70% better than they were. I’m not 100% happy and I think I might go the route that Sky did and replace them with Glass. Most of the distortion was caused by the window screens rubbing up against the plastic windows. I might try 1000 grit and 1500 grit sandpaper prior to taking them out completely. That might do the trick and when I do it I will let you know.
SEVEN
1979 53' MY Hull #563
Antioch, California
-
-
05-29-2020 06:38 AM #9Senior Member
- Join Date
- Aug 2016
- Posts
- 201
Re: Polishing aft windows in a 53 my
Brian L
IMPETUOUS - 1984 Hatteras 53 ED MY Hull #CN720
GOD'S GIFT - 1972 Chris Craft 42 Ft. Commander
QUEEN B - 1974 Century 24 Ft Buccaneer
GOD'S LITTLE GIFT - 1962 Johnson 19 Ft. Runabout
MON AMI - 1984 Catalina 30Ft. Sloop
-
Re: Polishing aft windows in a 53 my
I bought new window replacement inserts already cut to size from Sam's.
They are made from genuine GE LEXAN.
Been in for five years now no cracks, discoloration, scratches or water marks.
Looks like brand new glass.
Part number: S59462E
Fit perfect no sanding or trimming required.
Tim
1979 53' MY Hull #566
KNOW PRESSURE
Hampton, Virginia