Welcome to the Hatteras Owners Forum & Gallery. Sign Up or Login
+ Reply to Thread
Results 11 to 20 of 51
Thread: Cruising and cooking
-
Re: Cruising and cooking
--- The poster formerly known as Scrod ---
I want to live in Theory, everything works there.
1970 36C375
-
Re: Cruising and cooking
Randy Register - Kingston, TN
www.yachtrelocation.com
www.Safes4Guns.com
aka Freebird aka Sparky1
1965 41DC #93
-
05-22-2020 05:24 PM #13
Re: Cruising and cooking
We fill up the deep freeze with all sorts of meets (smoked, marinated, etc) in vacuum sealed bags. Stick the frozen vacuum seal bag in the yeti with the drinks of the day. Keeps the drinks cold and thaws dinner. Throw on the grill, microwave, or Suvie and dinner is served. We like to cook, but we do as much prep work ahead of time as possible.
Best regards,
--
David
-
-
-
05-22-2020 07:43 PM #16
Re: Cruising and cooking
Damn auto correct... Sous Vide Cooker
https://www.amazon.com/Wancle-Immers.../dp/B07BKSH4KYBest regards,
--
David
-
Re: Cruising and cooking
"DON'T BELIEVE ANYTHING YOU READ OR HEAR AND ONLY HALF OF WHAT YOU SEE" - BEN FRANKLIN
Endless Summer
1967 50c 12/71n DDA 525hp
ex Miss Betsy
owners:
Howard P. Miller 1967-1974
Richard F Hull 1974-1976
Robert J. & R.Scott Smith 1976-present
-
Re: Cruising and cooking
Until you pay an arm and a leg for a "pizza" in the Abacos. Having done that we elected to have a custom pizza stone that fits into the galley maid oven cut. People gathered around the dock when we were cooking.
20160106_175043.jpgLast edited by Dan Mapes; 05-22-2020 at 07:46 PM.
Regards
Dan
-
Re: Cruising and cooking
"DON'T BELIEVE ANYTHING YOU READ OR HEAR AND ONLY HALF OF WHAT YOU SEE" - BEN FRANKLIN
Endless Summer
1967 50c 12/71n DDA 525hp
ex Miss Betsy
owners:
Howard P. Miller 1967-1974
Richard F Hull 1974-1976
Robert J. & R.Scott Smith 1976-present
-
05-22-2020 07:48 PM #20
Re: Cruising and cooking
Works great... bucket of salt water, attach to the side of bucket, throw in the vacuumed sealed bags of food, set it and forget it, AND it will run off the inverter....
Best regards,
--
David