Would anyone have any drawer fronts or cabinet doors left over from their renovation, like the ones pictured?
Welcome to the Hatteras Owners Forum & Gallery. Sign Up or Login
+ Reply to Thread
Results 1 to 10 of 21
Thread: Drawer fronts wanted
-
Drawer fronts wanted
Gary
1984 53' MY Hull #625
"JACE"
-
Re: Drawer fronts wanted
I have built those. Its just plywood with Afromosia veneer. The most difficult part is making the edge trim. Any good cabinet maker should be able to do it for you.
Sky Cheney
1985 53EDMY, Hull #CN759, "Rebecca"
ELYC on White Lake--Montague, MI
-
05-18-2020 07:58 AM #3Senior Member
- Join Date
- May 2005
- Posts
- 182
Re: Drawer fronts wanted
I have some of various sizes. What sizes are you looking for?
-
-
-
-
05-19-2020 01:48 PM #7Senior Member
- Join Date
- May 2005
- Posts
- 182
Re: Drawer fronts wanted
I'll dig into the conex box this weekend and see what sizes I have. I'm pretty sure there were a couple of drawer stacks just don't remember the size.
-
Re: Drawer fronts wanted
If you need solid Afromosia stock you can get it from Exotic Lumber here in Annapolis, but teak can be stained to match Afromosia and looks basically identical, as noted above. Afromosia plywood is available out there, I got some from World Products, I think they are in NC. There are no doubt other sources as well.
-
-
Re: Drawer fronts wanted
I used the original Dupont 704C until I ran out. Then I bought the stuff that Sam's has made that is pretty much identical to the 704C. At first the new wood still looks lighter, but it darkens over time. My galley refit looked lighter for a couple of years. Now you would not be able to tell what drawers are new and which are 35 years old.
Sky Cheney
1985 53EDMY, Hull #CN759, "Rebecca"
ELYC on White Lake--Montague, MI