I can't find the receipt or part# for my transom zinc. I know it was over$100 at old marina and boat zinc . com doesn't show what I think it looked like.
Welcome to the Hatteras Owners Forum & Gallery. Sign Up or Login
+ Reply to Thread
Results 1 to 4 of 4
Thread: Transom zinc
-
Transom zinc
ENUFF. 1983 53MY.Hull #617 Barnegat Light Nj.
-
04-02-2020 04:51 PM #2
Re: Transom zinc
Call your vendor and have them do the work.
Scott
41C117 "Hattatude"
Port Canaveral Florida.
Marine Electronics and Electrical Products Distributor.
-
Re: Transom zinc
I don't mind paying the yard to do things I can't or don't have time to do. paying $80+hr to swap out a few zincs isn't good for my budget. I was hoping that someone here knew a part number so I could order what I need.
ENUFF. 1983 53MY.Hull #617 Barnegat Light Nj.
-
Re: Transom zinc
Usually those zincs are held on by 2 studs about 5/16 in size, may be bigger, just measure the distance between them and order a zinc with that spacing. The holes in the zinc are slotted so you don’t have to be exact, remove the nuts, take off the old zinc and install the new one, if the studs don’t fit through the slot in the zinc just drill it out to fit. John
Mahalo V
1974 53 Motoryacht
Hull Number 406
San Diego, Ca. Ready 32 Nordic Tug, Brunswick Ga.