My salon door lock/handle mechanism has been a little flakey lately. Took it to a locksmith and he says it's toast. Anyone happen to know where I may come across one new or used? I already sent message to sams so maybe they have it and this question is answered. Any ideas on a part number or where I may find one of these?
Welcome to the Hatteras Owners Forum & Gallery. Sign Up or Login
+ Reply to Thread
Results 1 to 10 of 10
Thread: Salon Door Lock
-
01-07-2020 01:57 PM #1Senior Member
- Join Date
- Jul 2013
- Posts
- 1,188
Salon Door Lock
SOUTHPAWS
1986 52C Hull #391 8v92TI
PENSACOLA, FL
-
Re: Salon Door Lock
I am curious as to which model of lockset you are looking at as I have a couple that I am wondering about myself.
Could you post a photo?
Thanks,
Nick1984 53' Extended Deckhouse
"Laissez Faire"
Delivered 1-1-86 (per Sam's)
Hull #CN737
Sausalito, CA
-
01-07-2020 02:52 PM #3
Re: Salon Door Lock
I just ordered a Merit Metal mortise lock set from Fisheries Supply. Fisheries Supply do not list the correct model on their web site and Merit Metal does not list any marine products on their web site, but they do supply it. I called Merit Metal and they said I needed a left hand reverse lock set and that is what I ordered through Fisheries Supply. It was about $30 cheaper than what they have listed.
https://www.fisheriessupply.com/meri...or-latch-3474t
I have not received it yet. I have read some comments that it is the original configuration for my 43DC. Whatever it is, I will make it work prior to refinishing the door.Robert
MANCHIONEAL
1973 43DC #365
Mattox Creek, VA
-
Re: Salon Door Lock
If the lockset looks like the one pictured in the link from Jammin's post, I can tell you that I have recently replaced broken springs in that style lockset with springs I got from Sam's. They now work fine. (The springs I received looked a little different than the springs I found in the locksets, but they worked well.)
Nick1984 53' Extended Deckhouse
"Laissez Faire"
Delivered 1-1-86 (per Sam's)
Hull #CN737
Sausalito, CA
-
Re: Salon Door Lock
Look under locks in Sam’s catalogs. Here are two of the many they have.
SEVEN
1979 53' MY Hull #563
Antioch, California
-
01-08-2020 09:54 AM #6Senior Member
- Join Date
- Jul 2013
- Posts
- 1,188
Re: Salon Door Lock
Thanks guys, I think this is the one
http://parts.samsmarine.com/PartSear...emNmbr=S84057A
But it does not show the lock mechanism in the image (where the key slides into to open/close the deadbolt).
You guys think it is just missing in the pic or is not included in the set?SOUTHPAWS
1986 52C Hull #391 8v92TI
PENSACOLA, FL
-
Re: Salon Door Lock
All;
Our Galley to Companion way latch was recently getting "hinky", and simple disassembly, cleaning, and generous lubrication of each sleeve and part prior to reassembly completely renewed it.
Same with our Salon/Pilot house door latches.. They could stand to be re-plated sometime soon, but when I renewed the doors complete with a new teak panel and paint/varnish as necessary, they're like new again.
Let 3-in-1 oil be your friend I guess, is my offering here.
48364959377_cda0e21ba3_c.jpg
Cheers Everyone-
ChuckLast edited by chuckbullett@gmail.com; 01-11-2020 at 06:29 PM.
Captain Chuck Bullett; W1AEK
Chartmaker 1978 53MY Hull #522
On-Air 2014 31 Benetau Oceanis Sloop
chuckbullett@gmail.com
-
01-12-2020 11:32 AM #8Senior Member
- Join Date
- Jul 2013
- Posts
- 1,188
Re: Salon Door Lock
Yeah, I wish that were an option, really do. The entire lockset tumbler came out with the key. Pins and springs flew everywhere. No warning, no stickyness beforehand.... The extra bad part was that the boat was dead bolted at the time. Luckily one of the salon windows was open. Crawled in trough the window but the inner deadbolt was non-operable.
Called a locksmith out, nothing he could do.
We had to use an air body saw to cut the deadbolt to gain access to the boat. What a nightmare!
Got a temp lock in for now while I work to source the replacement.SOUTHPAWS
1986 52C Hull #391 8v92TI
PENSACOLA, FL
-
01-27-2020 12:30 PM #9Senior Member
- Join Date
- Jul 2013
- Posts
- 1,188
Re: Salon Door Lock
Just to update this thread, ended up working with the crew at sams to make sure I got the right part, it arrived and installed Friday night. Nice and Shiney!! woooo!!!
SOUTHPAWS
1986 52C Hull #391 8v92TI
PENSACOLA, FL
-