I had been getting an LOC code on my generator - then shutdown, within one minute of startup.The water flow is good. I changed the water flow/pressure sensor which is in-line after the pump which was corroded. After the change it worked fine for 2 hours. Thought problem solved but now it’s doing the same.
How is this bypassed for diagnostic purposes? Unplug or bridge wires?
Thanks,
Welcome to the Hatteras Owners Forum & Gallery. Sign Up or Login
+ Reply to Thread
Results 1 to 1 of 1
Thread: Loc code KOHLER 15.5 EOZD
-
Loc code KOHLER 15.5 EOZD
MV "Mystery"
Cheoy Lee 58' Motor Yacht
Trinidad & Tobago