I just serviced my port aftercoolers and noted a crack in this elbow. Upon inspection of the starboard side it has a pinhole leak so I’m in need of both
Welcome to the Hatteras Owners Forum & Gallery. Sign Up or Login
+ Reply to Thread
Results 1 to 10 of 11
-
03-12-2020 10:00 PM #1
In search of Detroit raw water elbow
'88 55'C hull 394 BEATs Therapy
12-71 TA's ZF BW190 1.5:1 gears
-
Re: In search of Detroit raw water elbow
The same hardware on the 12V71TAs I help maintain.
Acetylene is your friend.
-
03-13-2020 06:40 PM #3Registered Member
- Join Date
- Sep 2016
- Posts
- 23
Re: In search of Detroit raw water elbow
scharfco.comAsk for Chuck. He helped me recently with an obscure cooler elbow. Very helpful
Joshua1985 60C #379SCYLLAGalveston, Tx
-
Re: In search of Detroit raw water elbow
Well, It's contagious.
Going to hose and Centek Glass Y.
20200325_181949.jpg
The Y connect and the Y are a Hatteras Got Ya.Last edited by Captain Ralph; 03-26-2020 at 05:08 PM.
-
03-26-2020 09:50 PM #5
Re: In search of Detroit raw water elbow
my bad Capt. I dont see a 2.5 to 2" Wye option from centek
Last edited by ageless; 03-26-2020 at 09:54 PM.
'88 55'C hull 394 BEATs Therapy
12-71 TA's ZF BW190 1.5:1 gears
-
Re: In search of Detroit raw water elbow
Seems two threads going.
It is a custom Hatteras Y.
Sam's part number 14108.
-
Re: In search of Detroit raw water elbow
https://www.centekmarine.com/product...3-wye-fitting/
I was going to mod the tube for the 3" end till I found the correct Hatteras part.
Still like my Glass Y idea. Never worry about it again.
-
03-27-2020 05:16 PM #8
-
03-30-2020 11:52 AM #9Senior Member
- Join Date
- Apr 2005
- Posts
- 228
Re: In search of Detroit raw water elbow
We had a small crack in one last year.
We made our own out of stainless steel.
-