Welcome to the Hatteras Owners Forum & Gallery. Sign Up or Login

Enter partial or full part description to search the Hatteras/Cabo parts catalog (for example: breaker or gauge)
+ Reply to Thread
Page 2 of 2 FirstFirst 1 2
Results 11 to 13 of 13
  1. #11

    Re: 32V Vs 12-24-36V Inverter

    32v Smart Charger, 2 bank:

    Analytic Systems
    Sky Cheney
    1985 53EDMY, Hull #CN759, "Rebecca"
    ELYC on White Lake--Montague, MI

  2. #12

    Re: 32V Vs 12-24-36V Inverter

    When I install victron systems there are 2 inputs and 2 outputs on many of the units BUT its either or as an auto switch. I don't know how to bring in 2 sources at once without a timing issue.(phase)

    FWIW the victron pass though is 50 or 100 Amps depending on the model. 30 amps is just not enough in most cases.

    I'm not sure how the magnum works but I bet it's either or and not 2 30 amp feeds on a single inverter at once.sounds too dangerous.

    As for adding sub panels. I'm not for it. Set a pass through and shut down large loads if they are larger than the system can handle. If not break high amp loads from the inverter output and use the pass through to feed them. It's not rocket surgery.
    Scott
    41C117 "Hattatude"
    Port Canaveral Florida.


    Marine Electronics and Electrical Products Distributor.

  3. #13

    Re: 32V Vs 12-24-36V Inverter

    30 amps is indeed a bit tight for pass thru. Good to know the Victrons have 50.

    When using both inputs on the Magnums (at least the 4024 I used), they are fed using two different legs of shore power.
    Pascal
    Miami, FL
    1970 53 MY #325 Cummins 6CTAs
    2014 26' gaff rigged sloop
    2007 Sandbarhopper 13
    12' Westphal Cat boat

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts