Those are okay, actually. I don't think we have any fat admirals who would complain about such a post. I'm sure I'll hear of it, if they do.
Welcome to the Hatteras Owners Forum & Gallery. Sign Up or Login
+ Reply to Thread
Results 11 to 20 of 25
Thread: I need accurate weight of my 41c
-
Re: I need accurate weight of my 41c
-
03-23-2020 08:14 PM #12Senior Member
- Join Date
- Jun 2007
- Posts
- 4,974
Re: I need accurate weight of my 41c
Moving forward with this project, the lift manufacturer I plan to use says 35,000lb is the largest he likes to make because 40,000lb gets much larger on beams.
HOF brains, ya think 35k is plenty for my old 41?
The issue is always, what about a bigger boat?!? Inside width between the lift piling is about 17-18foot.FTFD... i drive a slow 1968 41c381
-
03-23-2020 09:02 PM #13
Re: I need accurate weight of my 41c
33 to 35k with the original 8v53 detroits.
I'd say 35k is too close to chanceScott
41C117 "Hattatude"
Port Canaveral Florida.
Marine Electronics and Electrical Products Distributor.
-
Re: I need accurate weight of my 41c
I used to have some load cells from a truck scale. Wonder if you could make a DIY scale?
"DON'T BELIEVE ANYTHING YOU READ OR HEAR AND ONLY HALF OF WHAT YOU SEE" - BEN FRANKLIN
Endless Summer
1967 50c 12/71n DDA 525hp
ex Miss Betsy
owners:
Howard P. Miller 1967-1974
Richard F Hull 1974-1976
Robert J. & R.Scott Smith 1976-present
-
Re: I need accurate weight of my 41c
If it were me I would play it safe and plan for more weight (a bigger boat). But it would depend on cost weather I would buy one or not. If the 40,000 lb weight costs $2,000 more than a 35,000 lb lift I would go ahead and buy the larger capacity lift. If it was $20,000 more I would not. If you do decide to buy one please take photo's of it being built and installed and share it on the forum.
Mark
Lake of the Woods
1989 40DC
-
Re: I need accurate weight of my 41c
Closer you match the lift capacity to the actual boat weight, the more accurate you will need to position boat on lift to not overload one of the hoists.
cg of boat will move some dependent fuel, water, and how you load boat also.Ray
1983 61CY 319
AnnaVal
Jacksonville FL.
-
Re: I need accurate weight of my 41c
Is factory weight data available?
This could be that excuse to unload all those spares, tools, BBQ equipment, chairs, etc, etc from the bilges.
If your close, this could help a bit.
-
06-16-2020 08:10 PM #18Senior Member
- Join Date
- Jun 2007
- Posts
- 4,974
Re: I need accurate weight of my 41c
I never did get an accurate weight, but my guess seems to be good enough.
FTFD... i drive a slow 1968 41c381
-
06-16-2020 08:39 PM #19Senior Member
- Join Date
- Jun 2018
- Posts
- 1,069
Re: I need accurate weight of my 41c
That is cool.
Prometheus
1978 53' MY Hull #529
Viera, FL
-
Re: I need accurate weight of my 41c
Is that Matt's 45 in the background?
Sky Cheney
1985 53EDMY, Hull #CN759, "Rebecca"
ELYC on White Lake--Montague, MI