Things are getting serious Now!!!!! Well after a year of stressing and planning it was finally time to make the leap. Out with the old! The fit was tight on the oil pan so I made a detailed template to check. 1.5" clearance on the outboard oil pan. I would have liked more but that's ok. Now lots of cleaning and scrubbing while I wait for the new iron. I'm committed now or is that I should be committed now. I guess either one works! Going to be posting the old 12v71N cores and transmission also complete Hynautic control systems if any interIMG_20190819_092523171_HDR.jpgIMG_20190819_150708288.jpgIMG_20190819_120627377.jpgest.