It is a 1985 45 C that had the Forward port Skene Chock "Stainless Line Guide" that directs the dock line to the adjacent cleat had one of the 2
bolts securing it fail. The head of the slotted bolt sheared off leaving the remaining portion in its backing plate (from other posters on the HOF
I believe there is a threaded deck plate).

It appears to be a 1/4 inch bolt but i could be wrong. So I applied PB Blaster from the top, waited 15 mins, crawled into the Forward anchor locker
where i could see a 1 inch portion of said bolt protruding from the deck plate, gripped it with a vise grip and broke the bolt.

Now I have everything still the same as when I started this adventure but with the added complication of only a 1/4 inch nub of said bolt protruding
below the deck plate in the forward locker.

So can anyone please help me with a solution.

Thank you,

Greg
1985 45C