Head won't drain

[stimmy]

I'm fairly new to Galley Maid heads.
After not using the head for about a month, the bowl filled but wouldn't drain when flushed. The pump motor sounded normal. I checked the ball valve to the tank and it was open.
What should I look for?

[SEVEN]

Try using a plunger to force the water through the system. Once it fills up it should work. If not you may have to change out your stators.

[racclarkson@gmail.com]

Try using a plunger to force the water through the system. Once it fills up it should work. If not you may have to change out your stators.

Rusty is right. There is also a bleed plug on the waste end of the pump as well.

I would add that if you've clogged the toilet with too much paper, I've found jerking the plunger in an upward motion is useful to dislodge things.

[R D Young]

Go to http://razmarinepumps.com/ Read the trouble shooting sections, look at the videos, and buy your spare parts from them. You will be an expert in no time at all.

[stimmy]

This forum is great! Thanks. It makes the learning curve much shorter and less painful.
I learned before about not clogging the head when I tried to flush a paper towel. It did NOT like it; fortunately, after about 3 days, the paper towel got soggy enough it finally, grudgingly, went through.

[rustybucket]

Single Ply only!! I've tried RV toilet paper and it's almost too thin but the scotts single ply seems to be a good happy medium.