1986 63 MY. One of the sliding shower doors in the master head does not slide very well. Appears the
overhead wheel assembly is in need of repair/replacement. I cannot figure out how to disassemble without
knoocking the frame apart. It is made by Permalume. Anyone service one of these?
John McCarley
Water Colors
Wrightsville Beach NC
Welcome to the Hatteras Owners Forum & Gallery. Sign Up or Login
+ Reply to Thread
Results 1 to 3 of 3
Thread: Permalume Shower Door
Hybrid View
-
07-02-2019 08:29 PM #1Senior Member
- Join Date
- Apr 2005
- Posts
- 224
Permalume Shower Door
-
07-03-2019 07:41 PM #2
Re: Permalume Shower Door
On mine, the top frame is held in place by gravity and there is a 4 inch, or so, space above it. Just lift it up and out (or in, depending on location of towel bars) then slide the doors off the end. Definitely a two person job, as you will have to contend with the frame and both sliders at the same time.
Summer Star II
1986 Christensen 70'
Ensenada, MX
-
07-20-2019 07:57 PM #3Senior Member
- Join Date
- Apr 2005
- Posts
- 224
Re: Permalume Shower Door
It is as Summer Star said. Used 2
block of wood and small hammer to pop off top rail.