Last time I ran the boat we cruised at 1075 rpm for a few hours, all was well.
Coming back in I went to run her up the last few miles as I usually do and the starboard engine didn't want to spool up and blew a bunch of black smoke.
Hmmm, must be a turbo. So today I removed the air cleaners to get access, the inboard turbo spins freely, the outboard turbo seemed stuck. To see if it was just carbon build up I applied a socket to the shaft nut, 10-ish ft lbs didn't turn it.
I bought these turbos factory new (not remans) less than 200 hours ago......meh...!
Welcome to the Hatteras Owners Forum & Gallery. Sign Up or Login
+ Reply to Thread
Results 1 to 10 of 24
Thread: siezed turbo
-
siezed turbo
"The older I get, the faster I was......."
1979 60C "Ohana" hull# 331
-
05-20-2019 02:18 AM #2Senior Member
- Join Date
- Sep 2016
- Posts
- 130
Re: siezed turbo
Siezed could be a few things but with putting that pressure on the shaft it should have rotated unless there is a foreign object stuck in one if the turbines. I would pull it off and take it appart to find the damage and hopefully cause. If its clear just replace the damaged parts and rebuild. It's pretty simple to rebuild a turbo, especially dry turbos. If its a seized shaft therest a good chance there is a blockage in the oil feed. Typically this won't seize the turbo solid like you are describing.
1978 60C "Reel Action" Hull number 4 (304), 1986 36 Sedan "El Dorado" Hull Number 24 (324)
-
05-20-2019 02:20 AM #3Senior Member
- Join Date
- Apr 2014
- Posts
- 296
Re: siezed turbo
I knew a guy once that this happened to frequently. He always sprayed wd40 in there and worked it back and forth and eventually it would work free. I don’t recommend this. I’m just saying that I’ve seen it done. If you can pull the turbo yourself you can have a shop rebuild it for $500 or so.
-
Re: siezed turbo
Seems odd that it would go 200 hrs if it had a lubrication problem. Lack of lubrication tends to make them go bang. Shaft and bearing seizures are not the norm. Also, what kind of shape is the exhaust elbow in? They can cause exhaust housings to rot and the scale can jam the turbine blades. Although that usually happens when they're sitting. Or, as sixty said, foreign object.
--- The poster formerly known as Scrod ---
I want to live in Theory, everything works there.
1970 36C375
-
Re: siezed turbo
The mixing section - "exhaust elbow" - is three feet away and about two feet lower than the turbo. Anything is possible though.
However, due to crazy business adventures taking up all my time the engines hadn't been run in a few months."The older I get, the faster I was......."
1979 60C "Ohana" hull# 331
-
05-20-2019 11:48 PM #6Senior Member
- Join Date
- Sep 2016
- Posts
- 130
Re: siezed turbo
After reading your description again my guess is the turbo has been seized for awhile.
At any rate it all has to come appart to be diagnosed and fixed. Sounds like your exhaust is the same as mine and there is no real easy way for water to get back up from the elbow to corrode the turbo which barring water from the engine points to foreign object or lubrication issue.
Where are you slipped? Ill be in SD this weekend and might have time to drop by and take a look.Last edited by sixty; 05-20-2019 at 11:58 PM.
1978 60C "Reel Action" Hull number 4 (304), 1986 36 Sedan "El Dorado" Hull Number 24 (324)
-
Re: siezed turbo
I'm at the Kona Kai, slip E-29.
PM me for a phone number."The older I get, the faster I was......."
1979 60C "Ohana" hull# 331
-
Re: siezed turbo
I'll pull the turbo as soon as I have time, I've been crazy busy.
"The older I get, the faster I was......."
1979 60C "Ohana" hull# 331
-
05-21-2019 09:34 PM #9Senior Member
- Join Date
- Apr 2005
- Posts
- 3,526
Re: siezed turbo
Any chance you might have dropped foreign matter (like a washer or nut) down the exhaust riser when you replaced the turbo? I found this in mine the last time I pulled my turbos...
20180208_150221_resized.jpg
Yea, its a Craftsman 3/8 ratchet.Everyone should believe in something - I believe I will go fishing - Henry David Thoreau
-
Re: siezed turbo
Anything is possible, but the engines have been run for 200+hours on these turbos, with plenty of time at 2100 to dislodge foreign objects before now.
I did't change them the last time, a highly respected Detroit specialist did. It's coming off Thursday, so we'll see."The older I get, the faster I was......."
1979 60C "Ohana" hull# 331