Welcome to the Hatteras Owners Forum & Gallery. Sign Up or Login

Enter partial or full part description to search the Hatteras/Cabo parts catalog (for example: breaker or gauge)
+ Reply to Thread
Results 1 to 4 of 4

Thread: Paint costs

  1. #1

    Paint costs

    I had my boat shrink wrapped this past season and had done it only once before years ago with no problem. This year the shrink wrap was not brought down below the water line and the imron paint has bubbled along both sides of the bow. So I've opened an insurance claim, but just looking for an idea of painting costs so that the insurance company doesn't try to short me. I'm scheduled to launch later this week (after adjuster does inspection), so I won't tackle any of the damages til after the season. Any ideas on cost, or other advice on handling insurance would be much appreciated.
    Attached Images
    Last edited by CDB101; 05-14-2019 at 03:37 PM. Reason: better photo
    Chad
    1970 36C
    Catawba Island, OH

  2. #2

    Re: Paint costs

    Sorry, resolution might not be good enough on that photo
    Chad
    1970 36C
    Catawba Island, OH

  3. #3

    Re: Paint costs

    If you can get some 508u IMRON it can be blended ,without much of an edge. See if you can find some older Imron # 508u. 5.0. VOC. . Edward

  4. #4

    Re: Paint costs

    That's a shame, but as he said, it's possible to blend Imron in, which is an advantage over AwlGrip. Good luck on this one.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts