1972 58yf with the forward mounted helm...i have 2 storage compartments, one on each side of the helm. they are above the bench seats on each side of the boat.they are about 16 by 16 by about 12 inches deep. they look like a factory install except the doors, they are clear plexiglass with stainless steel trim. the plexi is in rough shape and i was wondering what others have done for doors on these compartments? i looked on yachtworls for pictures but none of the boats listed have these compartments just radios and electronics where they are on my boat. anybody have these? pics please of the doors.
Welcome to the Hatteras Owners Forum & Gallery. Sign Up or Login
+ Reply to Thread
Results 1 to 7 of 7
Thread: flybridge storage
-
12-03-2023 07:14 PM #1
flybridge storage
Mis b' havin
1972 58 yachtfish
58yf352
pass christian, ms.
-
12-03-2023 07:32 PM #2Senior Member
- Join Date
- Apr 2008
- Posts
- 2,003
Re: flybridge storage
Could you post a picture?
GLORY Hull # 365
Northport, NY
-
12-03-2023 07:37 PM #3
Re: flybridge storage
i dont have any AND im not good enough with a computer to learn how to post them
Mis b' havin
1972 58 yachtfish
58yf352
pass christian, ms.
-
12-04-2023 12:40 PM #4Senior Member
- Join Date
- Apr 2008
- Posts
- 2,003
Re: flybridge storage
The only storage I have in the bridge is below the helm, and not convenient.
GLORY Hull # 365
Northport, NY
-
12-04-2023 03:04 PM #5Senior Member
- Join Date
- Feb 2016
- Posts
- 251
Re: flybridge storage
Hey Bill, this is what I have on our 76 YF, they look OEM and match the under-bench doors which you can also see in these pics. They have the stainless steel edging held on my tons of little screws and nuts. They can be held open with a little tab that swivels over the door in the up position. These are the best pics I have... Sam's might even have them.
UPR Helm 2.jpgUPR Helm 3.jpgMatt
1976 58' YF, Hull #410
"Time Out West"
-
12-04-2023 07:19 PM #6
Re: flybridge storage
this is very similar to what i have, mine are hinged on the top and the door swings up and can be held open by a screen door type hook. i guess i will cut new plexi panels for the doors.
Mis b' havin
1972 58 yachtfish
58yf352
pass christian, ms.
-
Re: flybridge storage
These I had made by a plastics company. Uses the bridge/seating mold as blind stop for access panel. The originals were teak trimmed flat fiberglass panels which were held in by four bent pieces of aluminum and horrible to remove or replace. The door buttons are key.