Does anyone have or know where I could get the hardware to hold open and shut the middle windshield for a 1973 43DC, or an alternate solution? Sam's does not have the part. The rod is 32-1/2" long. Has anyone worked out an electric solution and if so, was it worth it?
Hatteras Windshield Stay.jpg
Welcome to the Hatteras Owners Forum & Gallery. Sign Up or Login
+ Reply to Thread
Results 1 to 10 of 10
Thread: Wanted 43DC Windshield Hardware
Hybrid View
-
03-05-2019 06:50 PM #1
Wanted 43DC Windshield Hardware
Robert
MANCHIONEAL
1973 43DC #365
Mattox Creek, VA
-
Re: Wanted 43DC Windshield Hardware
I was going to say Sam’s until I read on. I’ll keep my eyes open. Good luck.
SEVEN
1979 53' MY Hull #563
Antioch, California
-
03-06-2019 03:10 PM #3
Re: Wanted 43DC Windshield Hardware
Not sure if you are having same problem but I have same boat and window slider was jamming on pole. I took off one of the two brackets holding the pole and flipped it. Works like new now that worn, pitted end of pole on other end. Thought I would pass it on.
Scott
1976 43DCFB ,Hull #428, “Exodus”
Long Island, NY
-
03-06-2019 03:21 PM #4
Re: Wanted 43DC Windshield Hardware
Unfortunately, the hardware is completely missing. I've found a few things that look like possibilities like this Osculati hatch adjuster. I'll take some measurements this weekend.
Osculati Hatch Adjuster.jpgRobert
MANCHIONEAL
1973 43DC #365
Mattox Creek, VA
-
Re: Wanted 43DC Windshield Hardware
I checked my local consignment store called blue pelican in Alameda California but unfortunately they did not have one.
SEVEN
1979 53' MY Hull #563
Antioch, California
-
03-06-2019 08:24 PM #6