Welcome to the Hatteras Owners Forum & Gallery. Sign Up or Login

Enter partial or full part description to search the Hatteras/Cabo parts catalog (for example: breaker or gauge)
+ Reply to Thread
Results 1 to 8 of 8
  1. #1

    engine shut down cable nut

    Looking for one of these nuts.
    Someone must have lost when replacing the cable.

    Have found complete cable kits but just looking for (1) nut.

    Made by: morse, who became teleflex who became seastar.

    its part of a "DC Cable"
    Attached Images

  2. #2

    Re: engine shut down cable nut

    You will most likely have to buy the kit (Tee handle and Nut).
    It is made by Teleflex.
    Part number is 301916.
    Stock item.
    Tim
    1979 53' MY Hull #566
    KNOW PRESSURE
    Hampton, Virginia

  3. #3

    Re: engine shut down cable nut

    FYI - they are plastic now. I just bought two sets this past Fall.
    Eric
    41TC 1966 Hull #53 "Requisite"
    Kent Island, MD/Ft. Lauderdale, FL

    "Though she creaks - She holds"

  4. #4

    Re: engine shut down cable nut

    In general, those are called hex flange nuts or shoulder nuts. I know your looking for an exact match, but if you don't find it, as an alternative, you could replace them both with shoulder nuts.

  5. #5

    Re: engine shut down cable nut

    There’s a place called the blue pelican Inn Alameda California. They sell used parts on consignment. I visited there a couple weeks ago and I believe I saw the part that you’re looking for. Why don’t you call them and see if they can help you out. 1-510-769-4858
    SEVEN
    1979 53' MY Hull #563
    Antioch, California

  6. #6

    Re: engine shut down cable nut

    Thanks for the help, I ended up purchasing a new assembly.

    By the way, consignment store is : blue pelican marine, they have an eBay store.

  7. #7

    Re: engine shut down cable nut

    Quote Originally Posted by SeaEric View Post
    FYI - they are plastic now. I just bought two sets this past Fall.
    Eric,

    Do you mean that you purchased the set including the T handle, locking nut (metal), washers and cable for about $70 for one set?

    Jon
    Jonathan Brein
    1982 43' DCFB #550
    "Paragon"
    Chesapeake, Virginia

  8. #8

    Re: engine shut down cable nut

    Hello,

    i hope that you have mostly eliminated the need for those shutdown pulls by replacing the old style injector racks.

    rob

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts