Looking for one of these nuts.
Someone must have lost when replacing the cable.
Have found complete cable kits but just looking for (1) nut.
Made by: morse, who became teleflex who became seastar.
its part of a "DC Cable"
Welcome to the Hatteras Owners Forum & Gallery. Sign Up or Login
+ Reply to Thread
Results 1 to 8 of 8
Thread: engine shut down cable nut
-
03-01-2019 10:45 AM #1Senior Member
- Join Date
- Apr 2005
- Posts
- 228
engine shut down cable nut
-
Re: engine shut down cable nut
You will most likely have to buy the kit (Tee handle and Nut).
It is made by Teleflex.
Part number is 301916.
Stock item.Tim
1979 53' MY Hull #566
KNOW PRESSURE
Hampton, Virginia
-
Re: engine shut down cable nut
FYI - they are plastic now. I just bought two sets this past Fall.
Eric
41TC 1966 Hull #53 "Requisite"
Kent Island, MD/Ft. Lauderdale, FL
"Though she creaks - She holds"
-
Re: engine shut down cable nut
In general, those are called hex flange nuts or shoulder nuts. I know your looking for an exact match, but if you don't find it, as an alternative, you could replace them both with shoulder nuts.
-
Re: engine shut down cable nut
There’s a place called the blue pelican Inn Alameda California. They sell used parts on consignment. I visited there a couple weeks ago and I believe I saw the part that you’re looking for. Why don’t you call them and see if they can help you out. 1-510-769-4858
SEVEN
1979 53' MY Hull #563
Antioch, California
-
03-04-2019 09:21 AM #6Senior Member
- Join Date
- Apr 2005
- Posts
- 228
Re: engine shut down cable nut
Thanks for the help, I ended up purchasing a new assembly.
By the way, consignment store is : blue pelican marine, they have an eBay store.
-
-
03-14-2019 11:14 AM #8Registered Member
- Join Date
- Apr 2013
- Posts
- 2
Re: engine shut down cable nut
Hello,
i hope that you have mostly eliminated the need for those shutdown pulls by replacing the old style injector racks.
rob