Welcome to the Hatteras Owners Forum & Gallery. Sign Up or Login

Enter partial or full part description to search the Hatteras/Cabo parts catalog (for example: breaker or gauge)
+ Reply to Thread
Page 1 of 2 1 2 LastLast
Results 1 to 10 of 46

Hybrid View

  1. #1

    SeaKeeper Stabilizer worth it on an older boat?

    So literally the ONLY thing I don't really like about our boat (any boat for that matter) is that it can get rocky when drift fishing at night. It just so happens that drift fishing or super slow trolling live baits is one of my favorite types of fishing to do. I can bear the rocking, but my wife can't and many people that fish with us cannot handle it (barf fest).

    The 52c Hat is MUCH better at drift than our old Ocean 38, but it still gets rocky when rough.

    I'm really leaning toward a seakeeper install next winter. The seakeeper 9 itself is going to cost $72k plus whatever in install. As it sits right now our boat is probably worth somewhere in the $150-$200k range.

    I do not have any direct intention of selling the boat anytime soon, but I do find myself eyeballing the 65-70' boats at the dock much more lately....

    So, I guess I'm trying to convince myself, and my wife that a seakeeper is a good, or bad thing to install given all the factors.

    Good
    - will use boat more
    - will spend more time drift fishing / live baiting (my favorite)
    - wife will be able to enjoy the boat offshore much more, currently it has to be pretty calm for her to go.
    - friends/family will enjoy the boat more
    - I feel like keeping the boat from rocking so much will add life to the boats fixtures...etc. We have beat the hell out of boats drift fishing before.
    - Boat will sell MUCH quicker/easier whenever we do want to move up

    Bad
    - $72k for just the seakeeper
    - $30k? for install?
    - loose under cockpit storage area (pretty much junk down there now anyways though)
    - will never recoup the investment when selling the boat (at least that's what I feel?)
    - something else to maintain/break/upkeep


    So if my boat is worth $150k now, how much will it be worth with $130k of seakeeper on it?

    What am I overlooking? Is this a stupid idea?

    We are in the Gulf of Mexico so a sloppy wind chop is almost an every trip occurrence at some point. Drifting on a tight 2-3' confused sea (possibly from multiple directions) sucks.

    Anything that this $130k would be better spent on?

    Any feedback will be greatly appreciated. Thanks guys!
    Last edited by rustybucket; 01-02-2019 at 04:54 PM.
    SOUTHPAWS
    1986 52C Hull #391 8v92TI
    PENSACOLA, FL

  2. #2

    Re: SeaKeeper Stabilizer worth it on an older boat?

    None of this boating stuff/expense makes any sense in the first place.
    For me adding a gyro would be all about the benefit now, not worrying about the boat's worth down the road.
    So, your 52c is worth approximately 5% of a new similar boat (with all the new stuff of course), if spending $120K enhances the enjoyment/use factor enough just go for it.
    As an example, when we repowered with the CAT's we knew it didn't make any real sense. But. the new engines basically allowed us to have a boat that would perform close to a new one and most of all be as reliable as a new boat for a fraction of buying a new boat.

    Take a look at Quick Marine's gyro products.
    Seakeeper has basically had a monopoly in the space, there's other players coming into the US market.
    CRICKET
    1966 HAT50C101
    Purchased 1985 12v71Ns
    Repowered 1989 with 8v92TI
    Repowered 2001 with 3406E

  3. #3

    Re: SeaKeeper Stabilizer worth it on an older boat?

    If youve not done a seakeeper test ride do it.

    I was on a center console with one and what a difference it made.

    Just like a repower. If you feel its a benefit and worth the price do it. If not remember theres plenty of other boats out there sitting on the dock not being used because of a little weather.
    Scott
    41C117 "Hattatude"
    Port Canaveral Florida.


    Marine Electronics and Electrical Products Distributor.

  4. #4

    Re: SeaKeeper Stabilizer worth it on an older boat?

    I would have a look to see what's avail with a gyro in a certain price range. You might find your next boat and be twice as happy.
    ENUFF. 1983 53MY.Hull #617 Barnegat Light Nj.

  5. #5

    Re: SeaKeeper Stabilizer worth it on an older boat?

    Quote Originally Posted by Boatsb View Post
    If youve not done a seakeeper test ride do it.

    I was on a center console with one and what a difference it made.

    Just like a repower. If you feel its a benefit and worth the price do it. If not remember theres plenty of other boats out there sitting on the dock not being used because of a little weather.
    One of the things that really pushed me toward Hatteras 52c was the ability of the boat to handle rough seas. It has done so marvelously this past summer and we had her in some SNOTTY stuff. No doubt in my mind the boat can handle WAY more than I'm comfortable with.

    The drawback (which is leading to looking at a gyro stabilizer) is that we can now very easily and comfortably travel in 4-6'++ seas. But once we get there and try to fish we can only troll with and against the seas and forget trying to drift.

    I talked with the capt of a 74 Viking at the dock couple weeks back and he said the gyro has made 4-6 their new 2-3's in terms of drifting fishability.

    Looking at other boats for sale, doesn't look like I touch a 50'+ sportfish in good shape, fresh engines, new generator and a stabilizer for under $700-$800k. So looking at it that way, putting $120k into it to get what I want, is actually quite a bit cheaper than moving up or buying a previously stabilized boat....
    SOUTHPAWS
    1986 52C Hull #391 8v92TI
    PENSACOLA, FL

  6. #6

    Re: SeaKeeper Stabilizer worth it on an older boat?

    Quote Originally Posted by captcrunch View Post
    Rusty bucket, you may be able to get away with 2 small sea keepers at s lower cost.
    Quote Originally Posted by oscarvan View Post
    Can you take it out and re-use on the next boat? Sell it and recoup, say, 50%?
    These are both good points, not sure of the “lower cost” but 2 is definitely better than 1. The PO installed 2 Seakeepers on our boat (a former Navy pilot wanted redundancy). One of the selling points (theoretically) was that we could remove and sell one of them and still be stabilized. I don’t think that is very practical given how involved the install /removal would be. However, there were times that we only ran one unit, and it was great to have the capability. No idea what the after market value is, but Seakeeper is very responsive and has a good network of service technicians.

    Quote Originally Posted by Scarlett View Post
    We were just in Australia where the Maritimo line of boats are built. They are now using the Quick system exclusively in there 55’s. No water cooling which is the weak point on the Seakeepers, also smaller and easier to install. If someone finds out about pricing, let us all know. John
    The raw water cooling was not an issue with the Seakeepers per se, but (in my case), the March submersible pumps. They are not self-priming pumps, yet they are water cooled. We lost prime several times and didn’t know it. Burned up several pumps before I installed in-line flow sensors that are connected to N2K so I can see positive flow from any connected display on the boat. Have never had a problem since. Now we spool up one gyro on shore power before we even start the GenSet. It takes about 20 minutes to spool up to stabilizing RPM. By then we are switched over to ships power and ready to shove off. Also, the Seakeepers can run about 4 hours without raw water cooling (ask me how I know). They have a set of temp sensors on the housing, and all of the bearings that allow the main computer to trigger an auto shutdown before any damage is done to the unit.

    Quote Originally Posted by scottinsydney View Post
    I thought Seakeepers had an end of life and needed replacing with a factory reco unit after a certain number of operating hours??? If so, perhaps look for one that only requires servicing.
    I don’t know of any piece of sophisticated machinery that can run infinitely, but in our 3years of ownership I have never seen any reference in the documentation or heard from the many Seakeeper service and support people anything to support an “end life” point. I will make it a point to ask them the specific question now! They do offer some attractive trade-up options from time to time, like a 50% trade in value, but we are still super happy with the original units.

    What they do have, at least in the case of our M8000 units (basically the same as the new Seakeeper 9), is a 2000 hour service interval to inspect the units, replace fluids, zincs and seals, etc. That ran us about $1800 total (for the 2 units). So less than $1 per hour. If a unit goes 5 years without reaching 2000 hours, they recommend the same servicing.
    Jerry B.
    "Sea Joy"
    Hull #318
    1977 58MY (Galley Up)
    Palm Beach Gardens, FL

  7. #7

    Re: SeaKeeper Stabilizer worth it on an older boat?

    Had a good phone conversation with Quick US this morning. Honestly I'm sold. He is sending me sizing documents so we get sized up correctly. If these things work as advertised SeaKeeper better watch out. Price tag for the 19k was approx $25k cheaper than a seakeeper 9.

    MSRP for the 19k is $50k

    Some pluses
    - install can be done in water with crane (two over water cranes very close to our boat)
    - we can self-install
    - air cooled - no need for water cooling
    - smaller footprint than seakeeper
    - service in-place, almost everything on the unit is serviceable in-place (seakeepers have to be pulled)
    - no vacuum or vacuum system
    - significant cost savings

    Some minuses
    - air cooled, you have to have good air flow through the boat. probably plenty of flow when engines are running but we may have to add some additional ventilation. It will overheat if improper air flow.
    - ??? can't think of anything else?

    So, if I can save $24k over seakeeper AND save the $20-$30k install fee that is HUGE... and makes this decision MUCH easier... This may turn into a mid-summer project rather than fall/winter at these numbers....
    SOUTHPAWS
    1986 52C Hull #391 8v92TI
    PENSACOLA, FL

  8. #8

    Re: SeaKeeper Stabilizer worth it on an older boat?

    Before spending that much money on The Quick gyro I would try to get feedback from owners and see which builders are using them. There has been various products launched over the years which appear great on paper but don’t work out so well in the real world. Compressed air powered stabilizers come to mind. Lazzara installed them in their boats in the 90s and/or 2000s but they turned out to be troublesome. They switched to Trac hydraulics at some point.
    Pascal
    Miami, FL
    1970 53 MY #325 Cummins 6CTAs
    2014 26' gaff rigged sloop
    2007 Sandbarhopper 13
    12' Westphal Cat boat

  9. #9

    Re: SeaKeeper Stabilizer worth it on an older boat?

    Quote Originally Posted by Cricket View Post
    None of this boating stuff/expense makes any sense in the first place.
    For me adding a gyro would be all about the benefit now, not worrying about the boat's worth down the road.
    So, your 52c is worth approximately 5% of a new similar boat (with all the new stuff of course), if spending $120K enhances the enjoyment/use factor enough just go for it.
    As an example, when we repowered with the CAT's we knew it didn't make any real sense. But. the new engines basically allowed us to have a boat that would perform close to a new one and most of all be as reliable as a new boat for a fraction of buying a new boat.

    Take a look at Quick Marine's gyro products.
    Seakeeper has basically had a monopoly in the space, there's other players coming into the US market.
    You have a good point there. I could not touch something like our boat with a stabilizer for anywhere near what I would have just installing a gyro in ours.

    Looked at Quick's Gyros, very interesting! I couldn't seem to find any pricing or sizing info. You know if they have a US distributor yet?

    edit: found us distributor and sent them a message, product looks nice and much simpler than seakeeper.
    Last edited by rustybucket; 01-02-2019 at 06:29 PM.
    SOUTHPAWS
    1986 52C Hull #391 8v92TI
    PENSACOLA, FL

  10. #10

    Re: SeaKeeper Stabilizer worth it on an older boat?

    You shouldn't ask me. I love these old Hatts and anything you can do to make them better, I say go for it.

    Do it because you love the boat, not because you want to think about selling it.
    Sky Cheney
    1985 53EDMY, Hull #CN759, "Rebecca"
    ELYC on White Lake--Montague, MI

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts