Inexpensive Aft Deck Redo

[SEVEN]

Love the wood look. Great job.

[Photolomy]

I would love to take credit, but all I did was clean it up, flush the pipes, replace the water filter and the ice maker. Note to anyone who reads this later, the ice maker hose fitting (for the original U-Line model) unscrews and then the line will fit out the back, and connect to a modern connection. I cut the copper pipe and then had to replace the fitting, when I realized too late that I didn't have to.

[Stripes]

Awesome!

[chuckbullett@gmail.com]

The boat came with the original Hatteras furniture in the back...Attachment 29328Hard to see in the pic, but the cushions have mold on them. I thought about redoing the cushions and repainting the frames, but the furniture is pretty short. So we took it all off, as well as the ice maker, and the deck cleaned up like new...Attachment 29329Attachment 29330

Awesome job! Do you still have the SKU on the Edgestar?? Gotta replace our Marvel ASAP.Thank you.Chuck B. aboard Chartmaker; Hull #52253MY

[Photolomy]

It is the EdgeStar IB120SS. I got it on Amazon for $299.

http://a.co/d/6kckUdZ

It was the perfect width, and about 1.5" short (in my cabinet) so I added a 1.5" wood platform at the bottom of my cabinet to raise it up.

[chuckbullett@gmail.com]

It is the EdgeStar IB120SS. I got it on Amazon for $299.http://a.co/d/6kckUdZIt was the perfect width, and about 1.5" short (in my cabinet) so I added a 1.5" wood platform at the bottom of my cabinet to raise it up.

Many thanks! We have the very same cabinet.

[chuckbullett@gmail.com]

It is the EdgeStar IB120SS. I got it on Amazon for $299.http://a.co/d/6kckUdZIt was the perfect width, and about 1.5" short (in my cabinet) so I added a 1.5" wood platform at the bottom of my cabinet to raise it up.

Ordered!

[chuckbullett@gmail.com]

It is the EdgeStar IB120SS. I got it on Amazon for $299.

http://a.co/d/6kckUdZ

It was the perfect width, and about 1.5" short (in my cabinet) so I added a 1.5" wood platform at the bottom of my cabinet to raise it up.

... and DONE. Installed today. Looks great. Will upload photos soon. Thanks for your insight on the water connection. Fits like a glove.

Cheers.

ChuckB.

Chartmaker- 1979 53MY #522
San Francisco

[chuckbullett@gmail.com]

The old icemaker is a Marvel. She is pretty rusty and non functioning. It is headed to the e-waste pile in the next few days. The valve assembly has given up.The Edgestar is about a 64th of an inch wider than the old Marvel. A piece of 80-grit on my palm sander took off enough material to slip it in.The photos insist on uploading rotated 90-degrees. Not sure why.Cheers-Chuck B; Chartmaker