The boat came with the original Hatteras furniture in the back...
IMG_4530.jpg
Hard to see in the pic, but the cushions have mold on them. I thought about redoing the cushions and repainting the frames, but the furniture is pretty short. So we took it all off, as well as the ice maker, and the deck cleaned up like new...
IMG_0394.jpg
IMG_0393.jpg
Welcome to the Hatteras Owners Forum & Gallery. Sign Up or Login
+ Reply to Thread
Results 1 to 10 of 19
Thread: Inexpensive Aft Deck Redo
-
12-24-2018 08:11 PM #1Senior Member
- Join Date
- Jun 2018
- Posts
- 1,069
Inexpensive Aft Deck Redo
Prometheus
1978 53' MY Hull #529
Viera, FL
-
12-24-2018 08:14 PM #2Senior Member
- Join Date
- Jun 2018
- Posts
- 1,069
Re: Inexpensive Aft Deck Redo
And then we put in new carpet and furniture ...
IMG_0404.jpg
I also got an Edgestar ice maker that matches the dimensions of the original. I will post pictures of that as soon as it is in.
http://a.co/d/6kckUdZ
Prometheus
1978 53' MY Hull #529
Viera, FL
-
Re: Inexpensive Aft Deck Redo
What a transformation, I was surprised to see an electrical outlet plug just under the toe rail. Did you put that in or was that in from a prior owner?
SEVEN
1979 53' MY Hull #563
Antioch, California
-
12-24-2018 09:40 PM #4Senior Member
- Join Date
- Jun 2018
- Posts
- 1,069
Re: Inexpensive Aft Deck Redo
The previous owner must have put that in. He had a lamp on the original table that sat in front of the rear gate. I'll use them for lamps on the two end tables. You will also notice that he replaced the weather boards in the corners with solid pieces (no opening for the cleats) and then installed new cleats that go through a hole in the toe rail under the original cleats. You can see the stainless steel plate with the hole for the line under the original cleat. I thought they looked nice when I bought it, though after docking, they are kind of a pain because you have to feed the line through the hole. But I guess you sort of have to do that with the original setup as well, unless you are tall enough to bend over the handrail and push the line in. I don't know how the original cleats work since mine are covered now.
Prometheus
1978 53' MY Hull #529
Viera, FL
-
12-24-2018 09:42 PM #5
Re: Inexpensive Aft Deck Redo
Never show a photo of an open flame on your boat on internet. Should you ever make a fire damage claim, this is first thing the insurance company is going to look for to deny your claim. The open flame and that new carpet are so inviting. I am sorry, but I detest carpets even at home I only have hardwood and tiles, especially on the boat with humidity and mildew provided by the environment I cannot justify it irrespective its feel on he guests bare feet.....
M/V BONAZZA
1980 Hatteras
37 Convertible
Hull# - 405
Twin DD 6-71NA
Vancouver, Canada
-
-
12-24-2018 10:12 PM #7Senior Member
- Join Date
- Jun 2018
- Posts
- 1,069
Re: Inexpensive Aft Deck Redo
Prometheus
1978 53' MY Hull #529
Viera, FL
-
12-24-2018 10:20 PM #8Senior Member
- Join Date
- Jun 2018
- Posts
- 1,069
Re: Inexpensive Aft Deck Redo
Yeah, they are well done. You don't have to fish the line through, it slides right through. I guess it isn't that much different than the originals. You still have to lean over and get the line on the other side. I just have to get the routine down pat. Step 1 - Roll up the Iesinglass before you get to the dock.
Prometheus
1978 53' MY Hull #529
Viera, FL
-
01-01-2019 08:01 AM #9
Re: Inexpensive Aft Deck Redo
This looks excellent. Thanks for the tour. Love simple fixes and how it looks so livable. Would think a design layout section (tab) for this sight would be popular.
riverrandy
1975 64' MY Hull# 305
Merritt Island, FL
Cape Crossing Marina
-
01-06-2019 02:31 PM #10Senior Member
- Join Date
- Jun 2018
- Posts
- 1,069
Re: Inexpensive Aft Deck Redo
Wet bar lives again...
IMG_0413.jpg
IMG_0417.jpg
IMG_0415.jpgPrometheus
1978 53' MY Hull #529
Viera, FL