So the fault breaker on Ships Service 3 panel decided to give up the ghost the other night. In reading this thread https://www.samsmarine.com/forums/sh...lt-Protection& and talking to my electrician we've decided to bypass it and install GFCI's in the first outlet in each series. (Port lower, Stb lower, Port upper, and Stb upper). I checked my electrical diagram but it is not clear which is the first outlet in each series. Before we go opening up and disconnecting outlets to determine which is the first, has anyone with a 53 MY done this and know which are the most upstream receptacles? It may save us a bit of time.
Thanks in advance.
John
Photo Dec 05, 6 18 14 AM - Copy.jpg
Welcome to the Hatteras Owners Forum & Gallery. Sign Up or Login
Results 1 to 10 of 24
Threaded View
-
12-06-2018 11:31 AM #1
GFCI failure at the panel and solution to fix it
John Novotny
1979 53 MY "Serenity" #567
Baltimore, MD