Welcome to the Hatteras Owners Forum & Gallery. Sign Up or Login

Enter partial or full part description to search the Hatteras/Cabo parts catalog (for example: breaker or gauge)
+ Reply to Thread
Results 1 to 3 of 3
  1. #1

    Hatteras 41 Sportfish

    I have a 1965 41C that needs a new home. I have had her for 4 years as my first Hatteras.
    Yes I learned a lot, Anyway I spent a while cleaning then in 2017 I did all the stuff that seemed right to me, Including,
    New Thru Hulls X 9
    New Sea Strainers, Hoses.
    The Keel was a little beat, so removed all ruff Stuff and dried and filled with Hi Density foam and Re-Glassed the Keel, Nice Job too.
    Trued the Shafts, New Shaft Couplers, New Cutless Brgs.
    New Ground Plates, New Zincs Etc. New Rudder Posts,
    Nice Bottom Job, Removed the old Air Units and Water Htr. Painted Bilge.

    Then Replaced Starboard Fuel System, Need to do Port, 2 New 8D Batterys

    Then New Bimini Top and Front Window Cover. Re Did many Cushions.

    Started Cleaning up all the Wiring, Removed the old Head.
    Oh Yea, Got the right size Props, Not Installed Yet. But Have Them.
    Hull ## is 41RL 83
    The Wood inside is complete and Excellent. It had the wet bar. so no inside Helm but all
    the Gages.

    Then My Adult Onset A.D.D. Set in and I got a Bigger Boat A 46, Because I loved the
    Helm Seating, and the Wife wanted Something with a little more Room.

    So I am now a Two Yacht Guy, Please Buy One. How about $20,000.

    I have all receipts Etc. Coast Guard Docs. Will post Pics as soon as I figure out How
    Boat is located Fort Meyers Beach, This Boat is DRY the bilge comes on about once in 6 Months.
    Backdoor is Ruff. Have done some Paint, Needs More. Thanks for checking.
    Attached Images

  2. #2

    Re: Hatteras 41 Sportfish

    Curious what kind of props you have on her.

  3. #3

    Re: Hatteras 41 Sportfish

    Funny You should ask;
    the previous owner had some new props put on and never looked at them,
    I could not get any RPM,s out of the engine when I drove it over on one screw.
    When I had the Bottom Done, We found out they were 24 X 27
    So I got some 24 X 24 that I have not installed Yet.
    27 Pitch Does not get it.
    However, at idle the 27 pitch pushes un-naturally hard, meaning lots more thrust than
    you would expect.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts