Looking to purchase one matched set of left and right afromosia upper galley cabinet doors. Each door measures 12 1/2 inches side to side and 18 1/2 inches top to bottom. Hinges are outboard on the set and door pulls are in the middle. The panels are 1/2 thick with the edges trimmed. They are going on a 1980 61 ft Hat. Thanks for any help. Paul (PJ61)
Welcome to the Hatteras Owners Forum & Gallery. Sign Up or Login
+ Reply to Thread
Results 1 to 6 of 6
-
11-03-2018 02:38 PM #1Registered Member
- Join Date
- Mar 2018
- Posts
- 44
galley upper cabinet doors needed
-
Re: galley upper cabinet doors needed
You will probably have to build them or get a good woodworker to do it. I used cabinet grade plywood, then veneered it with afromosia. The trim can be made out of teak. The cut edges are painted with brown Rustoleum.
Sky Cheney
1985 53EDMY, Hull #CN759, "Rebecca"
ELYC on White Lake--Montague, MI
-
Re: galley upper cabinet doors needed
Paul I think I might have a pair of under the sink doors off of a 41 ft 1967 Hatt you
might be able to modify. If you're interested I can take some measurements if they
are still available. Let me know. GregFamily Tides - 1969 41' Twin Cabin
Mema - 1984 17' Boston Whaler Montauk
High Bar Harbor Yacht Club
Barnegat Light NJ
-
11-13-2018 11:05 PM #4Registered Member
- Join Date
- Mar 2018
- Posts
- 44
Re: galley upper cabinet doors needed
Hi Greg: I would be interested to purchase the doors you have if they can be modified to 12.5x 18.5 and would fit my application. Let me know your cost and how to complete the purchase. Thank you, Paul
-
-
Re: galley upper cabinet doors needed
Family Tides - 1969 41' Twin Cabin
Mema - 1984 17' Boston Whaler Montauk
High Bar Harbor Yacht Club
Barnegat Light NJ