Pressure tank glass relief valve

[SEVEN]

It’s true. I have to wRn every on board that that horn is going to blow. It I’d so loud it will scare people.

[SEVEN]

Can anyone tell me how to lower/adjust the pressure setting on my compressor. As mentioned it builds to 160 PSI on the holding tank and I’d like to lower it to your recommendations of 100 to 120 PSI. Please help if you can. Thanks in advance.

[tonytrakovich]

What air compressor do you have? Picture?

[SEVEN]

I’ll add photos when I get there, however it is the one that is on the motor and was original to the boat.

[SEVEN]

Here are a few photos. Hope it helps.

[SEVEN]

You will have to turn your screen to the right. Some how they uploaded sideways.

[oscarvan]

............

[SEVEN]

Good one.

[SEVEN]

Turns out it’s the Bendix D2 Air Governor. I’ll be changing it out next week.

[krush]

Turns out it’s the Bendix D2 Air Governor. I’ll be changing it out next week.

You adjust the tank pressure (which is controlled by when the compressor engages and unloads) by adjusting the air governor. Yours probably is operating fine. You remove the cap and adjust out the screw/bolt to lower the pressure.