Hi had guy convert SMX 1 to SMX 2 and developed problem with eyes not able to finish
for a week or so so I am finishing the wiring and have no 230V to the unit in the genny
room (sorry 1989 65 MY) there is 230V coming out at circuit breaker any help would be
greatly appreciated hope I am not leaving anything out thanks
Welcome to the Hatteras Owners Forum & Gallery. Sign Up or Login
+ Reply to Thread
Results 1 to 7 of 7
Thread: AC install problem
Hybrid View
-
08-10-2018 04:04 PM #1Senior Member
- Join Date
- Aug 2007
- Posts
- 246
AC install problem
-
08-10-2018 04:07 PM #2Senior Member
- Join Date
- Aug 2007
- Posts
- 246
Re: AC install problem
Forgot to add I did have 230V this morning when I started and turned off breaker
only had to wire the fan pump and power to the unit thanks again for any help
-
Re: AC install problem
Did you turn the breaker back on ?
-
08-10-2018 05:24 PM #4Senior Member
- Join Date
- Aug 2007
- Posts
- 246
Re: AC install problem
Yes I did have 230V both sides of breaker
-
Re: AC install problem
With some controls, power goes to the control box which may not be installed near th condensor. The control box sends power to the compressor when needed and you will also have wires for the high and low pressure switches.
That s how the electronic controls were set up on my old system... find the box, openit and see if you have power on the boardPascal
Miami, FL
1970 53 MY #325 Cummins 6CTAs
2014 26' gaff rigged sloop
2007 Sandbarhopper 13
12' Westphal Cat boat
-
08-11-2018 12:18 PM #6Senior Member
- Join Date
- Aug 2007
- Posts
- 246
Re: AC install problem
Thanks pascal that is were I lost the power much appreciated there is a dial like the
old cruisair control control anyone know what that is for thanks again