Does any one have a recommendation for a good hull or engine surveyor? We have come to terms with the seller and now it is time for due diligence. I have used the search function, which is not all that helpful, but it mostly was for the Lauderdale area or the Gulf.

I have left a message with Marc Slakoff and am awaiting a response. The selling broker suggested Bill Gladding of Gladding Marine or Gary Frankovich, does anyone know of them?

The boat is a 63' CPMY with 12/72TI's at 650hp and a compression test was performed about 50hrs ago when all the injectors were replaced and showed all cylinders to be 460/440 psi except for one at 430psi. I was told that 425psi was the service limit. I would think that in this case I need a good DD guy to have a look-see.....